TFT screen mystery

[mart.hart]

Does anyone know the workings of this tft screen.

I got the bottom 2 buttons as faster/slower and the top button is on/off
The second button is "set" and all it does is make a couple of symbols flash on the screen but that's as far as I have got with it.
Can these be changed to miles as well?

Thanks
Mart

 

[BrianSmithers]

View attachment 3420

Does anyone know the workings of this tft screen.
Can these be changed to miles as well?

Thanks
Mart

http://www.pedelecs.co.uk/forum/electric-bicycles/9291-kudos-change-display-miles.html

Kind regards
Brian

 

[mart.hart]

Thanks for that Brian, worked a treat.

Can the trip be re-set ?
I found what I think is trip but that still says Km (although it could be the alarm clock)

ta
Mart

 

[mart.hart]

Managed to get a manual for the screen.

Elek Bike Computor002.pdf - 4shared.com - document sharing - download

Mart

 

[FJJ]

Wondering where you got the screen from and what controllers it's compatible with?

Thanks,
FJJ

 

[mart.hart]

Kudos, its the one they fit to the king MTB

mart

 

[Jimod]

When you change the Speed to mph the symbol for KM will still appear above your trip meter. It WILL be reading miles though. When you're calibrating the wheel size there are a few different circumferences for each size of wheel, just measure the circumference of your tyre and flick the meter up or down until you get the closest match. When you reset the trip it also resets the timer and the max speed.

BTW when I went to the link for the manual you posted, Malwarebytes blocked access saying it was a potentially dangerous site.

 

[mart.hart]

Thanks for that Jim, I did wonder about the trip meter showing Km.

I have malwarebytes it is very good, but I have to switch it of sometimes

Have you noticed the screen switch off, my friend has the same set up and says it has switched off a few times without touching it. I am just fitting the kit to my wifes bike and that switched itself off a couple of times as I was setting it up ?

Mart

 

[Jimod]

It switches off after a while if you're not moving or doing anything. A simple press of the button will bring it back on. It has never switched off when on the move or stopped at a junction.