Throttle and pedelec stop working on bumps

[Cyclezee]

Was it a nut bolt or a self tapping screw cwah? It looks like you have removed it, just be very careful not to touch the terminals.

 

[cwah]

removed it completely here:

Have to be careful lol

 

[cwah]

Was it a nut bolt or a self tapping screw cwah? It looks like you have removed it, just be very careful not to touch the terminals.

It was just 1 screw I had to remove to access it. Shall I use a plier to tighten it?

 

[Cyclezee]

OK cwah, with each terminal in turn carefully and gently close the gaps slightly using an insulated pair of pliers or similar tool.
Treat it like you would an unexploded bomb

 

[cwah]

Ok, just did it with my plier. Repackaged everything into the battery box now.

I'll try tomorrow to see if it's fixed.

 

[Cyclezee]

I guess it is fixed?

 

[cwah]

Noooo! Still not. I resoldered 1 connection and will try another one soon

 

[cwah]

Finally solved the problem. The controller was moving inside the frog box.

I just glued it to the metallique bar to prevent it from bouncing. Now everything is fine

 

[Cyclezee]

That is good news cwah,
Not wishing to say that I told you so, but I told you so

"If there is no intermittent cut out of power when stationary and from what you said in a previous thread I suspect the controller.
How old is this kit cwah, the battery terminals look fairly new and clean?
What make is it and where did you get it? .
What happen to the controller, how did the case break and do you have a photo of it?"