Torq dynamo light

oobs

Finding my (electric) wheels
Oct 30, 2006
23
0
Hi all,

Second bulb went on my front dynamo light a few days ago. I reckon the bike just goes too quick sometimes and overloads the bulbs. I have now fitted a regulator supplied to me by a bike shop. They explained upon looking at the bike that the dynamo is designed to supply front and rear lights and that by supplying only front, it will keep blowing without a regulator. Hopefully, problem now solved.
 

ITSPETEINIT

Esteemed Pedelecer
Dec 11, 2006
492
0
Mere, Wilts
Torq Dynamo Lighting.

Out of interest really. Would it be a simple matter to connect the Front Light and a Rear light (yet to be installed) into the battery circuitry? Could it be achieved by someone acting on instructions with care?
Can some one provide those instruction or point me in the right direction?
Peter
 

ITSPETEINIT

Esteemed Pedelecer
Dec 11, 2006
492
0
Mere, Wilts
Continued from the last message:

Of course the front light bulb would have to be changed - would the lamp fitting have to be changed also?
Peter