Hi all, I have a350w 48v TSDZ2 from Woosh mated to a Specialized Allez. I bought the kit a few months ago, installed it with only minor troubles, and have ridden 200+ miles on it so far.
I haven't ridden it for 2 weeks or so, but fired it up today to get a run to the grocery in. The battery was sitting on the charger the whole time, so I put it on the bike and tried to go, but there was no power. The screen powers on, the speed reading is correct, and when I apply torque, the motor makes noise like it's trying to turn the wheels, but there's no assist. When I hold the breaks and push on the pedal, the engine is trying to push off. I played with it a ton today, and every once in a while after multiple restarts, it gives full power for around half a second, then reverts to nothing.
The battery voltage is 54.2. I've unplugged and replugged all cables on the bike to ensure they're seated properly. I re-seated the battery several times. I turned it on and off a shitload.
Any ideas? I'm about at my wits end!
I haven't ridden it for 2 weeks or so, but fired it up today to get a run to the grocery in. The battery was sitting on the charger the whole time, so I put it on the bike and tried to go, but there was no power. The screen powers on, the speed reading is correct, and when I apply torque, the motor makes noise like it's trying to turn the wheels, but there's no assist. When I hold the breaks and push on the pedal, the engine is trying to push off. I played with it a ton today, and every once in a while after multiple restarts, it gives full power for around half a second, then reverts to nothing.
The battery voltage is 54.2. I've unplugged and replugged all cables on the bike to ensure they're seated properly. I re-seated the battery several times. I turned it on and off a shitload.
Any ideas? I'm about at my wits end!