I've fitted the new boom to my trike and set it up sweet as a nut.
My question relates to the usable ranges. I recall reading somewhere that on the smallest front cog you shouldn't use the smallest rear one (or two) same if on the largest front cog, you shouldn't use the largest rear one (or two). Can someone confirm this for me please.
I did have a little off-load try and the arm doesn't have come a long way forward on largest and largest. Likewise it went back a long way on smallest and smallest. Almost horizontal in both cases.
The front rings are 30-39-52. The rear is a 32-11 MegaRange. original front was a 42T.
Many thanks for any advice.
Vikki.
My question relates to the usable ranges. I recall reading somewhere that on the smallest front cog you shouldn't use the smallest rear one (or two) same if on the largest front cog, you shouldn't use the largest rear one (or two). Can someone confirm this for me please.
I did have a little off-load try and the arm doesn't have come a long way forward on largest and largest. Likewise it went back a long way on smallest and smallest. Almost horizontal in both cases.
The front rings are 30-39-52. The rear is a 32-11 MegaRange. original front was a 42T.
Many thanks for any advice.
Vikki.
Last edited: