Volt Pulse loss of power

sneggysteve

Pedelecer
Oct 29, 2020
73
31
Bought 2nd hand Pulse in July and covered 250 miles with no problems at all.
Suddenly this week power disappeared. The battery is fully charged. Throttle turns the rear hub but only at 3.8mph. Display all ok but no power when changing assist levels. Checked all connectors.

Where should I look next please

Steve
 

Nealh

Esteemed Pedelecer
Aug 7, 2014
19,990
8,172
60
West Sx RH
3.8 is approx. walk assist speed, have you changed or accidently changed a setting ?
Check that the PAS sensor etc hasn/t been knocked and also wheel speed magnet if fitted.
 

sneggysteve

Pedelecer
Oct 29, 2020
73
31
3.8 is approx. walk assist speed, have you changed or accidently changed a setting ?
Check that the PAS sensor etc hasn/t been knocked and also wheel speed magnet if fitted.
Thanks for that - will take a look as soon as can
 

sneggysteve

Pedelecer
Oct 29, 2020
73
31
Thanks to Nealh for usual good advice.

Cleaned lots of mud from the sensor and away to go!!
I am a complete novice as you can tell.