My Woosh Gale has developed a couple of issues over this year. The power suddenly cuts out at a random 1, 2 or 3 times per days use. Display shuts off too, though bike re-starts if I keep pedaling and switch the display back on. Lately, after a re-start there is another momentary cut in power before things settle down.
The other issue is that the display shows full 4 led's regardless of how much charge is left, no 3,2,1 flashing. Gale will just shut down suddenly, completely from 4 leds when battery down to 33.3v from 41.7v fully charged.
Bike bought new Nov 2015, (although controller labelled mid 2014!).
Sounds like Phylion? controller not sensing Phylion battery voltage and operating standalone. Any ideas?
The other issue is that the display shows full 4 led's regardless of how much charge is left, no 3,2,1 flashing. Gale will just shut down suddenly, completely from 4 leds when battery down to 33.3v from 41.7v fully charged.
Bike bought new Nov 2015, (although controller labelled mid 2014!).
Sounds like Phylion? controller not sensing Phylion battery voltage and operating standalone. Any ideas?