Yose power 36V 250W 6km/h limit

[malyglodzio]

Hello, I installed a 36V 250W yose power kit with a C500 display on my bike. The problem is that I can only drive 6 km/h on the thumb throttle. How can i remove this limit?

 

[PC2017]

drive 6 km/h

KT controller or Lishui controller - I suspect the later you may not be able too

 

[Nealh]

Not a KT controller with a c500 so more likely it is a Lishui lsw controller.
They will set for 6km/h as that is the legal position for their use, download a c500 manual via search and see if there are any settings that can be changed.

 

[malyglodzio]

Lishui controller. The display has settings, but changing these settings has no effect. I changed in advanced settings SET 4 and SET 5 without any results.

In general settings I have SET 1, SET 3 and SET 4. I don't have SET 2 and SET 5. In the advanced settings I have all from SET 1 to SET 7. Photos attached. (I wrote the default settings with a pencil).

 

[Nealh]

It is likely hard set in the firmware then.

 

[malyglodzio]

Can I change the controller to 36V 350W? I saw that this controller has no limits. Will the engine burn out?

Is the motor in the yose power 36v 250W set the same as in the yose power 36V 350W set? I have the impression that these sets differ only in controllers. Can any of you confirm this?

 

[Nealh]

Some displays might not allow the disablement of the throttle option, even if the manual says so.

 

[sjpt]

Can I change the controller to 36V 350W? I saw that this controller has no limits. Will the engine burn out?

Unlikely to harm the motor. Make sure the battery can cope.