Hi all my daughter has a Zinc eco plus electric scooter and two of the hall sensors are damaged the part number on the sensors is 41F 930, the only hall sensors I seem to be able to find are 24v ones but the XFY Motor Controller says Voltage DC36V, the PCB that the sensors are soldered to has the number 105 on it and to purchase a PCB with three new sensors on it seem cheap enough to buy, this is my first atempt to repair a scooter so I am after some advice how do I know if the sensors on a replacement PCB are the correct ones? I have attached a photo of the motor controller in case helps, any advice would be gratfully received.
Attachments
-
1.4 MB Views: 2