johny

thanks woosh. this battery how look after it when used bike put it back on charge. let it run down put it on charge has it got cut off if left on charge

well i think thats my build finished apart from torque arm on way and hydraulic brake switch gona make bracket up for king meter and put it in middle of handle bars. new tyres on back wheel out of line by 2mm

is this ok with the wires cable tied

woosh got it working no need to make me some thing. i used thin bit of metal bent it in to shape put your sensor on it and wired tied it to frame what you think. had to make hole bit bigger was catching on ring when put pedal on. those hydraulic sensor to said to get dont work as the motor is working without magnet. put magnet to it it stops any ideas

ordered from d8veh link

ok thanks what size 12mm or 14mm

thanks how much you sell those torque arms. and the sensor needs to drop down more

is this ok and ive noticed my pedal not going on properly il need to file doen the fins slightly so the disk fits on bit more

no the sensor is as low as it can go and the magnets still below the sensor

fitted sensor and disk the magnets in disk are to low for the sensor it looks

yes not finished yet just wanted to check gap was ok im using spare thin cable ties i had lying around il go round putting cable ties you gave me once it up and running

this look ok next to brake cable

this look ok and bring it up and under crank housing

is the cables waterproof could i run them down next to battery tray or underneath next to other cable