Tazmantic

Hi does any one have much experience of this LCD? with my J-LCD I could choose 0 pas but this one only seems to go to 1 so I'm presuming if I don't want assist I have to switch it off. Cheers

This was the feedback..... BEWARE very suspicious cancelled sale when i ask why no key for bike and locks :D

Oh I didn't win it I just went and looked lol the guy won it first time for £103 i think it was and has already left feedback

Hi got any pics

Won, then relisted then removed

Managed to pick up a cheap 2nd hand morpheus labs M4s bracket and phone case so will give that a go, if it works ok for my needs will need to try get a couple more brackets (that seem to be out of stock everywhere)

Measured cells again and each group is 4.15v and from the ground to each group the voltage rises by 4.15v (8.3v, 12.45v, 16.6v etc) till I get to the last set and 41.5v so its looking like the charger will only charge to 41.5v.

Common ground ?

Thanks so not to worry about the 5th led on the test button then though I’m sure it used to light, will have to see what happens after I’ve started using it again. but one thing I’ve noticed as it’s 36v should it not have 10 cell groups (10s) and thus should there not be 11 wires on the balance plug mine only has 9 wires?? cheers

Pulled battery apart as soon as charge stopped and all cell groups measured 4.15v

Thanks for all the info guys need one that will go on a motorbike too so some reading to do

Thank you that's absolutely spot on I now know what I'm looking at thanks for taking the time to do that for me

I do but 15,000 is a lot to trawl through and a lot of buying to get one thats tried and tested

Thanks will try this later

Hi thanks for the reply, sounds like it might be what I’m after as I’d like to fit the mount to my bike and motorbike and be able to easily mover the phone across as use the phone as a speedo. Do you have any pics, part numbers or links please. many thanks

Hi all I'm looking for a mobile phone holder that's quite cheap and easy to move between bikes but holds the phone well, preferably one I could get a couple of brackets to fix to the bikes so can just swap it over. Thanks

So today I connected my lishui bluetooth dongle without the LCD (I did try it the other day with the LCD but it did nothing) and it worked fine could control evetything so it is sure looking like the LCD has gone belly up sitting in the shed wish I could remember where I bought the dongle as I might get another. Found it was woosh bikes

Is that an easy thing to do?

That's what its doing then sits at 38v, had it on all night and its still the same so is it looking like the cells are getting tired? is it worth pulling the battery apart and measuring the cells individually? Thanks

Thanks for the warning, so with this charger is there a way I can measure it? Would having it connected to the battery but having one of the charge wires disconnected from the charger board give me a true reading of the output?

Ah ok but it was deff showing 40v not connected so I turned it up to 42v and checked voltages again but it still only charged for a few seconds at about 42 volts then went to green light and sat at 40v

Just took it apart and can measure 40v when not connected to the battery 41.4 when connected and led red (charging) 38v when connected and led green (stopped charging) Have attached pic would the voltage pot be the one with the white on it to stop it being adjusted?

As I've mentioned before I didn't use it much and its been In storage for quite a while but I did charge till green light came on before storing. Though the charger is for the battery and says 42v it only seems to be producing 40v at the plug when disconnected from the battery (I've just measured) I do have a charger for a hoverboard that is 42v and producing 41.5v could I try that? the plugs are different (bike has 5 pins other has 3) but could I just connect the hoverboard charger + & - to the battery charging socket + & - or do the other 3 pins on the bike battery charger do something. Cheers

Ah ok mine just light up and only 4 so Ill leave it on charge for a while

Oh what voltage is good.