vincent v

I tried that several times for quite a few minutes each time, I tapped and shook the cables - nothing! The front brake is naturally directly below the lever, no high spots to trap bubbles. The back is more awkward. Even the 'simple' bleed (just a bowl on the lever bleed point) didn't work (I had a stand by then) , I had to inject from the caliper and it was full of bubbles. Maybe Wisper keep the 705 cost down by not fitting self bleeding brakes: they are unbranded (unlike the derailleur and other parts) and Wisper actually have a video tutorial showing you how to bleed them.

Thanks, I will give them a try

My brakes were completely dead, front and back. Maybe the many times I had to turn it upside down to fix something didn't help, but most likely due to 18months it spent behind boxes at the back of my shed after we moved house was the main reason.

My 705 pads look like this. They are 29.6mm wide and the same on the flat plate to where the fins start. Will the Aztec fit?

Needed to add an extra oring (took from plastic funnel) otherwise it dripped

I had the same issues and can confirm that the Total Bleed Solutions metal funnel fits the 705