pm this guy on here ,he has a few
http://www.pedelecforum.de/forum/in...e-gegen-knacken-und-zahnradbruch.39031/page-2
Hi,
unfortunately I can not speak foreign languages except German Translating with Google Translator is not available for "technical terms" + expressions disaster However, I have noticed that you are interested in a milled replacement gear. Yes, I still have 13 units in stock. However, I can only in conjunction with an overall conversion (additional floating bearing - support bearing + slip coupling) a broken gear can be converted to slip clutch. Therefore, the plastic, even if broken, to repair necessary. the defects gear is milled off, the inner part is called "entraining composite" needed. Anyway, I need the whole engine for repair with me in the shop. this is necessary because the additional support bearing must be incorporated into the housing. Please all the pictures that exist on this subject, again look closely, then it becomes clear why it is here After refitting is cracking "history" also, the gear can
no longer break since excessive torque, the driving disks exceed their breakaway. the biggest problem is the distance to you (UK = United Kingdom?)here, the transportation costs are already account for a large part of the actual ingredients costs and labor. Aso it is possible, but a new drive of Ebay (has indeed no slipping clutch + support bearings) but usually costs between 250-350Euro. I buy only even those with a broken gear and revised this. Maybe I offer these times in Ebay for purchase, which I do not really like to do. (N): Unsure:
(N)