Hi, I've just bought these together off eBay and I think I've set it up correctly but the wheel will only move in walk mode. The light on the pas is lit up and it blinks when I turn the pedal so I assume it's wired correctly but no power to the wheel, I don't have a throttle but I set the LCD to throttle and pas mode and tried shorting the throttle pins (can't remember the colours) but still the motor won't kick in. I haven't got the brake sensors connected, and I've tried with and without the hal sensor connected but nothing is working. Any help would be great. The model of the controller is ON-866 as far as I can tell.