Hi, I replaced a worn torque sensor in my TSDZ2 with a new one. It is something I have already done before but this time I am not getting any assistance.
The display vlcd5 is working fine with no error codes. The wires are connected securely in the controller.
I tried the walk assist to see if the motor will move but that is not working. So I don't know what may be wrong. Could it be the controller even if the display does no errors?
If I was able to flash the controller would this mean the controller is fine? Baffled as to why it's not giving any assistance.
The display vlcd5 is working fine with no error codes. The wires are connected securely in the controller.
I tried the walk assist to see if the motor will move but that is not working. So I don't know what may be wrong. Could it be the controller even if the display does no errors?
If I was able to flash the controller would this mean the controller is fine? Baffled as to why it's not giving any assistance.