Good Day Everyone,
In this topic I would like to compare your front hub rolling resistance to verify if there is any issue in my case.
I purchased the Swytch Kit (1 st gen), before this I asked Swytch if there were any differences between 1st and 2nd generation (excluded battery), below the reply:
"The 2nd gen has no differences for the 100SX hub.
Their was a revision of the 85SX hub during the 1st gen kit."
85SX, 100SX comes from Aikema manufacturer but I received the wheel with Xiongda hub motor.
In my option its rolling resistance is too big - the wheel stops from 28km/h to 0km/h in about 5 sec.
Please look at the movie =>
How it is in your case?
What brand front hub you have?
Could you possibly do similar test?
----------------------------------------------------------------
Just to compare, please look at the other video from YT
Thank you for help.
In this topic I would like to compare your front hub rolling resistance to verify if there is any issue in my case.
I purchased the Swytch Kit (1 st gen), before this I asked Swytch if there were any differences between 1st and 2nd generation (excluded battery), below the reply:
"The 2nd gen has no differences for the 100SX hub.
Their was a revision of the 85SX hub during the 1st gen kit."
85SX, 100SX comes from Aikema manufacturer but I received the wheel with Xiongda hub motor.
In my option its rolling resistance is too big - the wheel stops from 28km/h to 0km/h in about 5 sec.
Please look at the movie =>
How it is in your case?
What brand front hub you have?
Could you possibly do similar test?
----------------------------------------------------------------
Just to compare, please look at the other video from YT
Thank you for help.
Last edited:
