Anyone know the current drawn from the Torq Li-Ion battery charger HP8204 as I have put a flat battery on charge , and the green charger led activates in about 15-30 minutes , to indicate charge complete , but the battery is still flat.
Current drawn when charger led is displaying amber is 180ma and when green drops to 120ma.
This is too little current to be charging the battery , and even leaving charger on for 5 + hours , stiil same , try battery in bike- flat
Bike LED diagnostics flash 6 times to indicate battery flat.
Voltage at battery connections is 41.6v but I think this will show this voltage if flat anyway as it recovers?
Seems to me to be a faulty charger , but wondered if anyone has experienced anything similar?
Current drawn when charger led is displaying amber is 180ma and when green drops to 120ma.
This is too little current to be charging the battery , and even leaving charger on for 5 + hours , stiil same , try battery in bike- flat
Bike LED diagnostics flash 6 times to indicate battery flat.
Voltage at battery connections is 41.6v but I think this will show this voltage if flat anyway as it recovers?
Seems to me to be a faulty charger , but wondered if anyone has experienced anything similar?