Hello. Fitted my new Woosh kit to my bike today and went out for the shakedown ride. Love it! I have a question someone here must be able to answer. The trip display on the LCD , does anyone know how to reset it? I have looked in the manual and in the online manual and there is no mention of how to do it? I have tried a few things with no joy. Hope to get out for a nice long ride soon. TIA.
WOOSH KM529LCD Display
- Thread starter Pentozoom
- Start date
To zero the trip meter:
toggle the distance display to TRIP counter then hold down both the top and bottom buttons for 2 seconds.
Be careful, if you hold down just the bottom button, the bike will be put into walk mode. So Squeeze the brakes just in case.
A short manual on the KM 529 LCD is on page 13 of the manual.
toggle the distance display to TRIP counter then hold down both the top and bottom buttons for 2 seconds.
Be careful, if you hold down just the bottom button, the bike will be put into walk mode. So Squeeze the brakes just in case.
A short manual on the KM 529 LCD is on page 13 of the manual.
Thank you, Will get that sorted.. Also , is there a way of charging a phone from the bike so I can use sat nav? Thanks.
Related Articles
-
Swytch announce new conversion kit with ‘pocket-sized’ battery- Started by: Pedelecs
-
New Swytch launches on Indiegogo, raises £100k in first hour- Started by: Pedelecs
-
Swytch to unveil 70% smaller, 50% lighter conversion kit- Started by: Pedelecs