Recent content by KenR

  1. K

    help kt lcd4 display info 3

    Thanks again, I will try these but it will be a while.
  2. K

    help kt lcd4 display info 3

    Thank you, is there any chance that info 3 would show if the wiring has become damaged during folding and unfolding?
  3. K

    help kt lcd4 display info 3

    The display shows an info 3 error, Halls sensor error. When I work the throttle the wheel jumps forward and stops. Turning the pedals the motor seems to drive using pedal assist but I can't currently test this on the road as I am recovering from an operation. I have swapped the throttle with...
  4. K

    help kt lcd4 display info 3

    I have installed the following kit on my Brompton last year: Kit C SS:74 Silver motor with 16inch 349wheel Silver rim +KT T06SWF controlle+KT LCD4 display+thumb throttle+KT PAS+1-2 cable+9pins cable(100cm)...
  5. K

    Indirect Drive with a Bafang Mid Drive

    I have a very low step through Bernds Tandem with belt drive. I can mount a Bafang mid drive motor into a kiddie crank I attached to the frame above the front chain set. I can fit a 30 tooth 104BCD chainring to the Bafang and the chain set. The motor will drive downwards to the chainset and...
  6. K

    Best Front Hub 20inch wheel kit for a tandem

    Thanks all that has all been a great help. Just had a look at the simulator. Unless someone says different it confirms what everyone has said above, ie that with my 6 Ligo battery units the output of a 250w motor is very similar to a 500w motor. Looks as if the power is restricted by the LIGO...
  7. K

    Best Front Hub 20inch wheel kit for a tandem

    Thanks, My main battery is made up from six Grin Ligo units but I also have another which is six 36v 84wh skateboard batteries wired together in parallel. That way we can take our bikes by air.
  8. K

    Best Front Hub 20inch wheel kit for a tandem

    Thanks, There is always a way but it would need really major work as it is both belt drive, low step through and folding. Even then I don't think a Bafang mid drive would fit in the bottom bracket shells......
  9. K

    Best Front Hub 20inch wheel kit for a tandem

    Thanks, I currently have a 250w Bafang hub motor in the tandem and get a very similar experience to you. I live in a hilly area and want a bit more help on the hills. I prefer to be legal but with a touring tandem......
  10. K

    Best Front Hub 20inch wheel kit for a tandem

    Thanks again Neith, how do I work out my battery rating?
  11. K

    Best Front Hub 20inch wheel kit for a tandem

    Thanks for your reply. I would like the maximum power that I can get with 600wh 36v battery. This is mainly for hill climbing as the tandem is very heavy. I have fitted several kits on other family bikes but do not have much technical knowledge so any further help appreciated.
  12. K

    Best Front Hub 20inch wheel kit for a tandem

    I would appreciate some advice on the best kit for my tandem. It has to be front hub as a mid drive can't be fitted and I want to keep the Rohloff gears. We have several ebikes in the family and all use 36v batteries so I am looking at 36v 500w set ups being the most powerful geared motors I...
  13. K

    New Controller Stopped Working

    wheeliepete Thanks so much for your suggestion, which I followed, and it is working fine now. :) For anyone else with a similar problem it did work when I first assembled it, see my first post, but it stopped working very soon afterwards. When I fixed the motor connections today I slightly...
  14. K

    New Controller Stopped Working

    Help appreciated. On my Bafang BS01B I fitted a new controller. The old one had blown. I tested it on the bench and it worked. I disconnected the battery and plugged it in again but got a flash. After that the display a C961 still works but the motor does not drive. Walk assist does not...
  15. K

    Help please Bafang BBS01 shorted out I think

    Testing second hand kit on a working bike which had a damaged higo socket to the display.