Search results

Thanks again, I will try these but it will be a while.

Thank you, is there any chance that info 3 would show if the wiring has become damaged during folding and unfolding?

The display shows an info 3 error, Halls sensor error. When I work the throttle the wheel jumps forward and stops. Turning the pedals the motor seems to drive using pedal assist but I can't currently test this on the road as I am recovering from an operation. I have swapped the throttle with...

I have installed the following kit on my Brompton last year: Kit C SS:74 Silver motor with 16inch 349wheel Silver rim +KT T06SWF controlle+KT LCD4 display+thumb throttle+KT PAS+1-2 cable+9pins cable(100cm)...

I have a very low step through Bernds Tandem with belt drive. I can mount a Bafang mid drive motor into a kiddie crank I attached to the frame above the front chain set. I can fit a 30 tooth 104BCD chainring to the Bafang and the chain set. The motor will drive downwards to the chainset and...

Thanks all that has all been a great help. Just had a look at the simulator. Unless someone says different it confirms what everyone has said above, ie that with my 6 Ligo battery units the output of a 250w motor is very similar to a 500w motor. Looks as if the power is restricted by the LIGO...

Thanks, My main battery is made up from six Grin Ligo units but I also have another which is six 36v 84wh skateboard batteries wired together in parallel. That way we can take our bikes by air.

Thanks, There is always a way but it would need really major work as it is both belt drive, low step through and folding. Even then I don't think a Bafang mid drive would fit in the bottom bracket shells......

Thanks, I currently have a 250w Bafang hub motor in the tandem and get a very similar experience to you. I live in a hilly area and want a bit more help on the hills. I prefer to be legal but with a touring tandem......

Thanks again Neith, how do I work out my battery rating?

Thanks for your reply. I would like the maximum power that I can get with 600wh 36v battery. This is mainly for hill climbing as the tandem is very heavy. I have fitted several kits on other family bikes but do not have much technical knowledge so any further help appreciated.

I would appreciate some advice on the best kit for my tandem. It has to be front hub as a mid drive can't be fitted and I want to keep the Rohloff gears. We have several ebikes in the family and all use 36v batteries so I am looking at 36v 500w set ups being the most powerful geared motors I...

wheeliepete Thanks so much for your suggestion, which I followed, and it is working fine now. :) For anyone else with a similar problem it did work when I first assembled it, see my first post, but it stopped working very soon afterwards. When I fixed the motor connections today I slightly...

Help appreciated. On my Bafang BS01B I fitted a new controller. The old one had blown. I tested it on the bench and it worked. I disconnected the battery and plugged it in again but got a flash. After that the display a C961 still works but the motor does not drive. Walk assist does not...

Testing second hand kit on a working bike which had a damaged higo socket to the display.

Thankyou, not good news but at least I know.

Trying to sort out bent pins in the green display socket with a screw driver I got a spark. I forgot to disconnect the battery which I know is stupid. The motor is dead. I have plugged in a proven fully working wiring loom with another working display, and nothing. I have also plugged a...

I love bafang and just might do that. The bike has an evo386 bottom bracket which has some reinforcing underneath it so the clearances are very tight for bafang. So I would need an eccentric bottom bracket from Fast or similar and then get some longer bolts. Sadly the Lekkie adaptor would not...

Maxon replied to me as follows: a) Our motor delivers 500W and is as far as we know not legal in the UK and the EU. b) SRAM 12x1 speed gear "can" be a problem. We have cases in which the cassette streaks on the motor housing. Our system is made for maximum 11 gear cassettes. c) Due to point a)...

I came across this online: https://www.maxonbikedrive.com/en/home They offer a UK legal 250w motor rear wheel motor kit with a through axle adaptor. Questions 1. Has anyone got any experience of this kit? 2. Does anyone know of any other 250w hub motor kits which will fit through axle...