Search results

KT controllers and headsets cost a bit more, but have clearer and more config control I went bargain hunting and didnt save much in the process tbh the same kit is available via ebay and amazon i linked the ads since they both detail lots of options. Try contacting whoosh who are a uk...

the lishui controller has connections suitable for use with a 5 TO 1 CABLE , this provides an additional input for a 3pin pas sensor t feed into the controller. The Pas connector is the other end from the brake throttle and headset connectors. lights? If you source a controller like this...

rub dubbin into the seams of your leaky footware plastic bag 'oversocks' will work for leaky footware but you need good quality un punctured polythene bags, any hole and water will seek your feet and old carrier bags are not upto the job.

Looks Good, even had a wee browse for suitable boxes and these seem like the good VFM wiyth a narrow profile.. Waterproof? though ?? I would add a drain hole or 2 just in case.. what are you thinking for hooks and hardware? Much better than old paint buckets ..

ebikes are sure a hell of a lot lighter ;)

looks rather like my 76 750 F1

punt worthy? or gender switched if the cable hack fails

Taking @Nealh 's comments above into account and since i am not familiar with your bike specifically I would change my suggestion to attempt to rejoin the cable connection by connection as suggested by the others above battery out first.. but??

can you post pics of both plug and socket and the headset with any id numbers visible. If the damage is limited to the headset and its plug AND 'we'can identify the lcd headset used a replacement should sort you out. if the other cable end is damaged you may also need to replace that too ? and...

If your focus is getting the best performance from your battery perhaps keeping the battery in warmer temps for overnights and charging has appeal. providing the ability to eek out a few more amps and miles. If however your battery has ample capacity for your regular needs there is no need to...

ER yes ? pm sent.. if i understand correctly even the sonoffbasic has a spare gpio exposed so adding a led/rgb for a visual indicator is doable with basic soldering skils (use pcb solderpads)

Reflash the sonoff with tasmota, dont rely on remote servers to control your local gear. would be a pita if your internet went down and you lost control of the off switch.. Theo's project has All the bases covered, With Zero reliance on any external servers. If a newbie to programming etc dont...

me leave? nah,, Is that a better gauge than using the battery% and battery size to determine the charge required, ie 50% 11ah battery would require circa 5.5ah to charge up from a 2a charger, should take about 2 and 3/4 hrs to charge fully. I ask because i am using battery% as reported by my...

And the collecting of bike bling starts........ How big is your garage?? Not big enough.. ps did u see my new 'shiny' LINKY

Cheers, I will shut up now ;) get my coat and skulk home..

I am no expert i rely on my ability to cut and paste into a search engine, so not doubting the correction. However what if your jumping on the bike early morning for a ride into work after a sub zero night? Wouldn't it be better to keep the battery within operating temps?

cheers google.. Keep the battery in the house when temps start to fall below 5c at night to be on the safe side. if ridding in the colder weather a 'cozy' might be an idea worth looking into

Glad to hear your getting on so well so quickly, my 1st week with my ebike was a little more of a bumpy ride getting used to the changes..

(When off road) is the simple addition to your statement required as lip service to keep all quiet wink wink ;) since the evil inception of WWW2 moderators etc of forums and boards can be held liable for the idle gossip members can engage in so lets play the game and not put folk doing us a...

Your very welcome.. Double check the gender/ pin orientation (innies or outies) of the plugs/sockets on things you buy, I almost ordered and waited 3 weeks for sensors with the right plug fitted just the wrong gender so would have been trying to plug male into male plugs!!