Search results

based on the pics something like ebay example But it looks like your headset/display uses a julet plug/socket if so you will need something like another example In addition a headset that can talk to the controller (you may still need an extension lead between headset and contrller) some...

cycle insurance for theft/loss and 3rd party liability primarily, an ebike as long as rd legal may carry a premium, but since many cycles cost 1000's anyway,, my circa £800 valued ebike (new bike + kit costs) costs £80 p.a You may get a better deal from you home insurer, iirc co-op offered...

experiences with those pesky link gremlins !! or just an inquisitive sniff unaware of the contents, or worse, a toddler finger painting scale catastrophe ..?

bad use of the word shared perhaps.. dual use track white line delimiting usage with cycle and people icons along with red ring signs indicating which side to use

According to youtube etc waxing is the way to go with chains, check it out but basic paraffin/candle wax with some additions melted and used to soak your chain is apparently better than any lube option?? iirc the additives teflon and titanium oxide? can be found in bundles with wax on ebay for...

Thanks for the links to the covers @guerney So far my only water related concern is leaving them unzipped in a rainstorm and coming back to liters of water contained in the bags, no drain hole as standard.. , Initial inspection indicates a nice waxy sheen to the fabric, but time will reveal the...

pump a 2l pop bottle fitted with a tyre valve upto 100psi and you can keep an air horn tooting for days.. fit a big air horn and i will give u a 30l polykeg you can safely pump upto 100psi it'l weigh bugger all and give you hours of tootin pleasure

After my first posts and pics of my bike some wise members advised me to consider pannier carriers for the rear rather than the higher centre of gravity black plastic box currently fitted. So when i was presented with a special offer from an aliexpress seller I had to bite, and they finally...

I have the same issue daily with folk wandering all over the shared cycle path 3 or 4 abreast often with kids too and how shocked they look when i tinkle my lil bell at em.. I read on one of the US EV forums of a chap who fitted a rather loud clown car sounding horn, which apparently encourages...

well i kinda like the look of those surRons and similar.. every little helps.. I spent hours browsing the site comparing ads, looking for good prices and pnp costs with good reviews that didnt look coerced or bribed.. And forgot to pay attention to delivery times ho hum.. I managed to equip...

what controller do you have? what is it replacing? clear pics of the labels and or product links will help confirm compatibility. what if anything did the headset display when powered on? did you set the wheel size ok?

Thankfully Its ready made cables i have on order.. I saved about 63p by ordering from aliexpreress so have a few weeks to develop further concerns before opening a pack with a phone case in it...

Ha, I saw silver... I will be scrapping some strands tomorrow for sure.. Glad to be proven daft.. Cheers.. Ive been scanning the ads for the cables i have on slow boat order and other similar cable ad pages and no mention of wire core materials then raised my suspicions and confusion...

On dismantling a non working ebike, i noticed the cores within the power wires in the julet? terminated 9pin socket for connection to the hub motor were Steel? then on looking closer at the no-name controller installed its power wires were a telltale red of aluminium, My kit installed on my...

re gears slipping, dont try to tweak the tuning screws on the gears unless the chain is coming off your freewheel or you cant reach some gears. . Just adjust the gear cable tension via the screw barrel where the cable joins the gear changer or at the shifter end, just a turn or so, and try it...

Well that tells me..

Just an idea... But all the sensors on my ebike kit are hall effect sensors that respond to magnets.. on that basis alone i think its worth a punt your dodgy sensor is also a hall effect sensor, Worth checking out at least, unless someone in the actual know comes along and shoots me down.. ;)...

Its unclear how your set up testing? photos provide a lot of info You need to clamp the shaft or axle in place either in the bike frame, or held in a vice or similar stationary position if not installed in a bike.. If in place in a frame its not clamped tight enough you may need to add spacers...

Funny you should ask about ridding without a headset.. asked a similar Q myself and you kinda can.. See @saneagle 's post Here. As for a specific recommendation, I cant help there but have browsed over way too many cheaper no-name controllers in search for the elusive KT controller and...

hello and welcome, interestingly empty looking machine, lots of space for batteries for the extra long haul perhaps.. in a different class from my retro fit hub kit.