Search results

Rog, I'm very thankful for your help. It was really useful. But you don't have to answer all my questions in details if it's too much. I'll also try not to ask too many questions and look for answer on my own.

Guys, thanks for the safety warning. I'll take a maximum of precaution. Don't hesitate to warn me to the max in order to not burn my house. Amifang, your advice and pictures are extremely precious, I did the same following what you've said: I double shrink tape my wire and checked for...

Guys, I'm going to use a real uk plug. going to take some picfure tonight. It"s going to be too expensive if I ask for a professional. will need your help tonight

Would that be better if I get one of the UK power cable, cut the plug and wire it to the power supply? http://www.ebay.co.uk/itm/160778465761?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649#ht_5015wt_1033

I need to use my power supply. What should I do except to ask for a TV repair man?? Can't I do anything? What's so wrong about the picture?

There is an earth terminal on the right of the main black one. I just wired it with another black wire. I also tested for continuity the little clamp in the middle and it's the ground. Is it all right now? Am I safe to solder and plug it to my UK plug? ps: The power supply is for 220V...

Thanks Franck. Added the insulation tape and wire to the ground of the UK plug: Is it all right? Can I solder everything? :)

Hello there, I've just received my 600W power supply from here: 24V 25A 600W Power Supply - Mega Power Hyperion Charger imax icharger | eBay I'm trying to install it but I'm not sure if I'm right or not. Would need some expert confirmation on this as I don't want to put my house on fire...

ahah, the brompton is invading the forum :p I really don't recommend the BPM on the front wheel. The torque is too high and you may break the front fork. Especially with the brompton very light fork. You can buy something smaller such as a Q100 or the G209. But I strongly advise against...

A lock I've found yesterday on the street :) The lock does seem solid lol

Really really nice job Jerry. Now the forum is full of brompton guys ;) Do you really feel the difference with 3 kg removed from the bike? And how's the torque of this little motor? This set up is almost a bike without motor lol

Really nice bike on the brompton. I'm really keen on knowing how this G209 does perform. My actual conhismotor DD uses around 25wh/km... but I have crazy acceleration peak of 3000W. I'm trying to limit the max current because I can't really use my bike for very long with that. Have you...

Ahah, don't know what I can do to prevent the pedestrian or other to crush my handlebar or bike. Time will tell how it works. Jazper, I hope it's secure enough for few hours.

Yeah, I was thinking about that. But as the bike is quite heavy (probably 25+ kg with the lock and everything), it would be quite tough to slide it over the top of the pole.

I'm just wondering if I should add a cover to the bike, but I woudn't want to have people thinking it may be a bomb :rolleyes:

Here is the bike locked outside:

Thanks for the explaination muckymits, I connected the led light and it wasn't working. spiritburner, I already purchased my amber light. Have to get a led signal flasher now. I think I'm going to get the cheap one from HK

I bought some 7 core trailer cables at 10A. They seem very bulky for the max amps. Not as good quality as the Turnigy silicon wire and much bigger. But actually, from all the wires I've purchased online, none of them were as good quality as the turnigy wire. Now I think I'll only purchase from...

Thanks Rog. You're always helpful :) I haven't found any screw to open the flasher, and as the seller propose me a refund for it, I'm simply going to send it back to him. I've found 2 other flashers that I may use: - This really cheap one: Electronic LED Blinker Flasher Relay Fix 3 Pin 12V...

Too sad I couldn't make it to be a 2000W electric bike... Hopefully my steel frame brompton should be able to do that ;)