Search results

I am trying to fit a 36v back of the seat Battery where there used to be a 24v. Battery. Unfortunately they are different heights so the Locking hole doesn't match. Any ideas?

https://revolutionworks.com/?fbclid=IwAR2eB23chaIAegUJk734INbjV5OAsXnK09k-DrUnI1H4lRi8l_z0luSTAPc

Yes, confused. Down the back of the Seat.

Years ago I bought a Cyclematic 24v. BikeIt had a Downtube battery. I installed a 36v Battery with integrated controller. It was too big for the Downtube so placeed it elswhare. This battery is coming to the end of it's life . My wife has a Freego bike & 2 36 v. Downtube Batteries, so was...

Is this still available?

Hi, Bit more detail please: Throttle, Wheel size, Condition, Price? ?

I check the power on the old throtle wire R.B. W. I noticed that I got 4.5v on the Red/White wires. So I connected from the old Black to New Black ,old Red to New white, and old White to New Red and it works!!!

You are correct, it's the White/Blue combination that drives the motor, 30 to 40. I was expermenting with the other wires and left it as you saw in the photo. This combination brings a flashing Display.

It's a 3year old Cyclamatic., going great untill my mishap. The 1st is the 3 wire Throttle that I broke. I bought an Identical one but it doesn't work. The second pic is a 5 wire Throttle and if I connect Red/Red, Black/Black, Blue/White the motor spins at full speed as soon as the Red Button...

Never thought of that, always struggled on a big hill out side our house. Thank you.

I hve tried on this site for help before but here goes. Broke my Thumb Throttle, 3 wired one. Had another 3 wire one but did not work. Had various 5 wire one, tried various combinations but no luck. Got lucky with one combination but bike took off and hit gate. No real damage. With 3 wires of a...

I'm 75 so I think 15miles would be more than enough. The hills worry me more.

My old bike, throttle broke, Controller enclosed in Battery case. Motor seems to run Ok but cannot find anyone with the expertise to find out whats' wrong. I live at the End of England. I was looking at this...

Ah well, I have posted on the Local web to see if anyone can help. Halfords on test what they sell. Thanks for your patience .

I this is the controller.. I'm in trouble as it's inside the battery case so if i replace the battery I cannot access any wires. I found a 5 wire throttle and connecter Red/Red, Black/Black & Blue on Throttle to White from bike. The motor went full speed but I could not control it.

Only getting 1v between Red & Black. I assume I have the Multimeter set correctly?

Connected red/red, white/white & Black/Black

Broke my thumb throttle, a 3 wire one. Tried other 3 wire one but no good. Tried a 5 wire one and the wheel went at top speed but couldn't control it. Bought a new 3 wire one in case the other was broken also, but no luck. If the Throttle is not connected and batterie is connected...

Averaging about 62, but throttle makes no difference, it's either on or off by the red switch

Took it into Halfords yesterday, about the back wheel not freewheeling. Collected and they said there is nothing they can do, "probably" the motor. I connect a throttle and wired it the same as before (Back wheel off the ground this time) and the motor drives but not sure if it,s strong enough...