Search results

  1. saneagle

    Making a torque throttle instead of a speed throttle for a cheap controller

    He has a Yose kit with speed control controller. That's what he wants to change. It doesn't matter what's on other bikes.
  2. saneagle

    Prices of the electricity we use to charge

    All the WEF owned mainstream media are having an absolute meltdown. Only time will tell whether Trump and his friends made the right decisions. He claims that he has pedges of 6 trillion dollars worth of investment coming into USA. The other side are doing everything they can to undermine him...
  3. saneagle

    Prices of the electricity we use to charge

    He can sing and dance well, though.
  4. saneagle

    Prices of the electricity we use to charge

    The dealers don't actually buy their cars until they sell. Instead, they take a sort of loan for each one to pay something like a stocking cost, so they have to pay an amount of money for each car stocked every month until the car is sold. Until then, the cars are sitting in fields at their...
  5. saneagle

    Disc rotor bolts

    If you put a spacer under the disc, the disc won't line up with the caliper. You normally need to put a washer on the axle that side to move the disc inboard. The spacer would move the disc outboard and make it worse unless you put it outside the disc, but then the screws will come loose because...
  6. saneagle

    Disc rotor bolts

    The screws normally come with the motor. They should be already in it, and they're the correct length for the motor. They put a plastic spacer underneath the heads, which is the thickness of a disc. You remove the spacer when you install the disc. Normal disc screws for bicycle hubs are too...
  7. saneagle

    Are the KT controllers slightly pessimistic as far as battery level ?

    P5 doesn't really affect the accurancy. Instead, it's the time to change the battery display. If the number is too high, there's a delay in it updating. If it's the number is too low, it dances aboutwith how much power you take. Do you remember the old car fuel guages that went up when your...
  8. saneagle

    Prices of the electricity we use to charge

    I though they said Trump was becoming old. He looks in pretty good shape in this video: https://x.com/i/status/1908943859373027818
  9. saneagle

    Battery Fires

    I can recommend that you eat a bit of humle pie. There's some special ingredient in it that will soften granite, then you'll be back to normal.
  10. saneagle

    Prices of the electricity we use to charge

    The BVLRA are lobbying the government for help because they can't sell used EVs. If you look at the chart on the left of the slideshow page 3, you can see that they're saying the residual value of an EV after 3 years is only 35% and an ICE car would typically be worth around 50% more...
  11. saneagle

    Motor Number

    Suppliers name would be could be TBK or AKM. The vehicle has to be labelled, so it's OK to have those details on a label attached to the motor. Make the label as 48v. Nobody will care or even check if you run it at 36v, but you might have to answer some questions if the label says 36v and you're...
  12. saneagle

    Pendleton eSomerby Controller Upgrade

    I noticed that he said set C7=1 for cruise control activation. You shouldn't do that. It only works with a throttle and it can be dangerous because it will lock the throttle on when you don't want it. You already have pedal asist, so cruise is completely unnecessary, and it's illegal.
  13. saneagle

    Are the KT controllers slightly pessimistic as far as battery level ?

    Good point. P5 is basically a damping factor for the battery display. If you set it too low, the display goes up and down every time you open the throttle. If you set it too high, it still shows your battery empty after you charged it until you've ridden half way up your street. They give...
  14. saneagle

    Motor Number

    No, not directly. The top one is just the production number, and the one underneath is a code number that says front/rear, disc/not disc, freewheel/cassette and stuff like that. AKM labels are easy-peal. I heard of one that was so easy to peal that it fell off a 250w one and landed on a...
  15. saneagle

    Are the KT controllers slightly pessimistic as far as battery level ?

    I've never noticed anything special. It probably depends on your battery too. I know when mine goes down to two bars, I haven't got much left. You know that you can display the actual battery voltage by a short press of the power button to schange the bottom line of the display from total...
  16. saneagle

    Making a torque throttle instead of a speed throttle for a cheap controller

    KT controller can be set as follows: 1. Set the global speed limit of 25 km/hr or whatever you want. 2. Set P4=1 KT description is nin-zero startup, which means (normally) the throttle only works when you pedal but is subject to C$ setting 3. Set C4=3 The throttle will work independently until...
  17. saneagle

    Hi everyone.

    I can't help it if Neal gets mixed up. VFR400 is still around. I've seen him recently in Telford. VFR400 is D8veh. Previous account was deleted.
  18. saneagle

    ADO A20 F

    I live in Telford, so I can pop over and see you if you can't get it working.
  19. saneagle

    Wich case/bag would you reccomend for my battery?

    You have to be very careful with bags. Many times, when we see a photo of an ebike fire, the battery is in a bag. I think part of the problem is that there's too much movement inside the bag, which lets the battery bounce around until a wire becomes dislodged or one of the welded cell connecting...
  20. saneagle

    ADO A20 F

    Unfortunately, you haven't shown the colours of the three wires connected to the throttle.