Search results

Pretty sure they only supply the plain type - looks that way still

Pardon ? Never heard that one before Bob-on is a northern , maybe Manchester centric one Where's this common vernacular ? Sorry to hijack thread - just interested !

Oh , I ended soldering my throttle directly - the connector was bit rubbish Have you tested it ? Ie know for sure the throttle is gone rather than just bad connection ?

Oh dear - hopefully just on holiday

That's right - I solder the cells. Quite often I'm soldering pairs of 18650 which still have spot welded strips on them - easier than soldering directly My understanding is that prolonged heat exposure damages them. A higher wattage soldering iron reaches temperature much faster and so you need...

Btw I solder my packs Not as neat by miles though !

I bought a 7.4v booster pack from these seller about a year ago The cells were supposed to be Panasonic cgr18650ch They appeared to be so as well. All I can say is they packed up in a couple of weeks. They were treated well and had a lipo alarm etc I suspect they were fakes Since then I got...

Yes sorry my assumption was you bought from here a few months ago http://www.8funbike.com

You'll need a multimeter to check voltages -I never owned one before I got the same kit you have Invaluable tool less than a tenner on eBay or under 20 from halfords/maplins etc Start with the battery and test for voltage there. If not at 42v or close to then it's not getting charged which...

Photos failed Try again

Finally got to test the Mistral and the modular battery system Hooked up 4 homemade packs ( 3 x 11.1v and 1 x 7.4v) to the homemade sieries harness. This is hacked into the top half of the battery . Once the bike gets home (7 miles away from my work) I can dispense with this. I couldnt work...

Thank you

You got it ! Still a good learn for me The BMS is a little strange - maybe in two parts ? There is a PCb sitting on top of the bottom 5 cells and the main BMS with balance leads etc at the top of the whole pack Do you know what this extra PCb is ? Sorry no photo at the moment

flecc and d8veh have turned out to be spot on Who'd have thunk it eh :) ! The pack held 41.5v and managed about 300 yards before going too low and LVC kicks in. Give it a few minutes rest and it bounces back to 40v Guess some or all cells are knackered and cannot take any load Maybe I can...

Thanks And will do. Still haven't got the bike to test either this or the recovered phylion pack

Sorry to raise such a question when you are pushing the boundaries of pedelec tech .,,,,,,but may I ask how much ?

Afternoon all I've made 4 x 11.1v packs from scavenged 18650 cells. They are complete with balance leads, xt60 connectors and lipo alarms. They are all between 11 and 13ah packs. I also have a 7.4v pack. Five packs in total then but loads more cells if I wish r more I use one at a time as a...

Sorry Arbol - outta my sphere of know how ! I have a b6 but I just have a bog standard 5a power supply I found in a charity shop More power is better as whilst I can charge a 3.7v cell at 5amps I mostly use it to charge 11.1v booster packs. And it tops out at 2.3a due to weak supply

You can select the amps with which you want to charge - I think the b6 goes as low as 0.3a or high as 6a

Welcome And you do of course have the rather awesome On One bikes on your doostep My commuter bike is converted Pompetamine. - utterly bullet proof, maintence free bike the 456 hardtials are excellent too. Not ridden their newer stuff