Search results

For a commute bike a mid drive would be the least favourable due to extra maintenance and wear costs, a hub will be far more reliable and relaxing unless one enjoys turning up sweaty. By all means use a mid driven bike for properv off road or leisure use but otherwise a hub will be ideal. I...

Saracen you are still misleading folks with your biased and unknowledgable experience of the mid drive vs hub being better myth. Both on the front wheel drive being problematic and the use of a hub drive for off road , both are very capable of doing so and can contest to this having done many...

In all the years I have owned a bike, I have never changed a cassette because of jumping or teeth issues. I recall buying a coupe of cassettes simply because of wanting a larger top gear like a 36t or a 42t. Chains are seldomly changed bar really old worn ones several years old, in the most...

Anything is possible if the correct components are used.

Most of the Deliveroo's I see where I live to my eyes aren't eapc or legal, most have a front or rear D/D hub and an independent twist & go throttle. The speeds of these riders is certainly not 15.5 mph.

One reason why I wouldn't entertain buying such a eapc.

Wrong thread @Saracen.

KT lcd9, one can buy left or right handed throttle version . Your controller will need a green 5 pin LCD julet & a yellow 3 pin throttle julet, if you only have the 8 pin julet from the controller then a 8pin 1T2/splitter cable is also needed. KT LCD9 Color Display Meter with Right/Left...

One can buy the TReGo front kit to fit Qr dropouts, not sure if one can lock out the lean action.

Speak to Wisper or a dealer for repair, alternatively David may see your post. The error code is though a speed sensor fault, may even be a simple magnet to sensor gap issue.

As well as changing the chain ring, one can also change the nexus sprocket to change gearing.

Fantastic, she is a beauty and found her for ever home. Lots of red going on her lh flank , certainly an unmistakeable calico.

Saracen is that a frac on the skytee ?

Solder a pair of tails to a xt90 anti spark and then open the controller and solder them directly to the board.

As mentioned one can't use a bafang controller with it display . Also bafang use higo's and not julet's, the pin sequence differs. One can't mix and match electric system's, only motors are generally swappable bar the suntour.

You have been watching Mike Reid.

I would be inclined to test for a controller mosfet short.

I didn't mean LCD systems but there are the crappy 3spd led systems.

Spain you will need to be 250w and legal unless you like the inside of their jails. Fines are far more severe than here.

For anyone a 250w legal eapc will be ample with a decent controller and 17/18a at 36v or a 44/48v setup, both will supply 500w if ever needed.