Search results

For me charging on bike is no go as it means I have to trail a lead . Also as I use my bikes for almost everything bar carrying 4.2m lengths of wood or plaster board /very awkward stuff , I prefer a very secure and strong fixed pannier rack that will take 30kg. My bikes are not only a...

The orientation of the sensor can change the fwd or bkw signal if it is a single hall sensor, much the same as sometimes reversing the disc face.

I'm afraid it's not my cup of tea at all. Specific mid mount frame , and internal battery. Also rear rack weight specs will be needed as it has little in the way of strength support, bar the two vertical supports .One assumes it is also held by the mudguard.

It will at most drop 3/4" - 1" before the light bracket or the rear frame pushes the mud guard on to the tyre.

That type is designed for the rhs behind the crank wheel. What you can try before binning it or changing side, is to rotate the sensor so the head is at the top and then try it.

Wiring sequence is correct. PAS Red /5v , Blue /Sig & Yellow /Gnd. Con Brown/ 5v, Yellow/Sig & Black /Gnd. Red or Brown can be 5v , Yellow or Black can be Gnd. When both Yellow and Black are both used then Black is Gnd and Yellow the Sig.

Show us a pic of how the sensor is fitted, you may have to rotate the sensor 180 degrees.

Any external cooling added to a tsdz is useless , the issue has been the internal air spaces that simply don't tranfer heat to the outer shell at all well. One reason why those using OSF highly recommend internal mods to aid the heat transfer better.

SW102 is small & neat, it is similar to the KT lcd4 . they can be a little impractcial and fiddly to use esp if wearing gloves. For the other displays I can't say as my past experience with the BBS has led me to the tsdz2 which I much prefer esp the TS drive system.

The battery will be fine as they do use genuine cells if stated , the 50e is a good medium powered current draw cell. At 4p the cells can have a max 40a rating but typically one should only use /draw 60% of the rated current draw for life longevity. The cells are 10a rated so are good for...

It has been said that the akm/yose hubs internal gearing is different from the usual akm hubs with a higher gearing . Typically dependant on model and rpm the akm's use to be around 8:1 - 13:1 for reduction ratio where as most simple clones of basic Bafang hub motors use 4:1 ot 4:4:1 so 80 - 88...

Use an in line fuse .

This is where things get very expensive if the battery is a proprietary battery, the dealer brand can and will charge silly money for a new one. Even worse if it is a bosh ,yamaha et al type of bike.

Yes if only seeing 0.5v from the 5v rail then it has failed. One can use any display and compatible controller pairing though you may have to carry out some minor wiring changes with the PAS and throttle is used. Tbh your best to spend £80 - £100 and get a KT controller and LCD also as the...

EN15194 no where states any thing regarding controller rating out put, all it says is the motor must be rated for 250w continuous use without overheating. There is no max out put rating otherwise the likes of bosh . yamaha, et al would all be illegal as well.

Both of those box types have no issue with deforming or lid closure, one has the nice yellow clips that fold over and snap in place and the other box the lid simply snaps on .

Motorising a trailer is illegal, one is meant to display reflective triangles but I don't bother. I use more meaningfully a double flag on a bendy pole , lights , normal round reflectors and diamond reflective tape .

The issue is policing and not enough numbers to do it also there is the lack of even the very basic bike equipement on all bikes E or non E, that is a bell/horn and proper lights. Imv confiscation and a heavy fine should be the minimum, problem is this country is too free and liberal with...

One can't use any coating on the pins outs, otherwise one will lose the contact. The green staining is moisture ingress on the copper pins and then causes the tracking, in this case it doesn't look like tracking has connected a pair of pins .

These fast food delievry's are only here because people are too lazy to cook or to go out and get their own food, I have never used one and wouldn't do so .