Search results

If the cells are decent then yes it will.

I seem to remember Valkenburg having an airforce base when I was there in my youth, F104's in the proper days of sleek interceptor jets. F104's had a history all around the worlds airforces of being a widow maker to those who flew them.

There is already another legal class of a pedelec and that is the S or speed pedelec, issue is users don't like the extra cost and other definitions of using the bike. Like licencing and fitting a number plate , insurance third party, full face m/c helmet. One can ride at 25 /30mph + ( this I...

There is no way your motor/bike can be legal, it is in law a moped /motor cycle. Restricting to 250w isn't possible because it is a 1kw rated motor.

If one finds /gets the correct female connector, one still has to solder and shrink 5 small wires as they all will come with tails. Or if one gets a connector with extra long tails one could desolder the old ones from the PCB and solder the new ones on so no extra joints.

Loading is only 100lbs/45kg so one has to choose carefully if wanting heavier loads , for this only the Carryfreedom offers in the same form factor a heavier 90kg load if not attached by QR skewers. Other wise the burley should be a good buy , I can vouch for the sturdyness of the cf and it's...

Julet connector systems can be tested but not as straight forward as the sm/block connectors. One has to buy a pair of M/F julet tails of the correct pin out to make up a Y lead that termintes into a block strip, then insert the Y lead between the item to test. Probing the block strip is then...

One expects the smalle one is an M6 , you need a female tail . Julet connectors come in a variety of sizes and shapes . 5/20/100 PCS Mini Waterproof Extension Cable Aviation Plug M6-M8-2/3/4/5/6 Pin Male Female Connector Julet Sensor Socket - AliExpress Bafang /Higo connectors are incompatible...

Mini mighty morph pump works fine or a similar make out on the road or even trails. One can as a back up carry co2 as well. The only air in a HDB system is that which may be in the main reservoir, one may temporary get poor brake feel if up turning the bike but often after a few careful lever...

Anything in my eyes that uses proprietary parts and Can is a no go area, short life and expensive parts doesn't make sense .

From the pics it isn't clear if connectors are supplied, the wire ends are heat shrunk for safety so may have bullets under the heat shrink. You would have to be sure if buying it would fit and lock in to your rack.

You don't say waht bike ? If it was a Woosh bike then one would be fine with a Woosh KD58C because they programme their stuff to be compatible with their controllers but not with someone elses.

Do you still have the old display ? Firmware is set /uploaded by the factory or vendor with the programming software, so no not something one can do. The controller and display would be programmed as a matching pair and each vendor may have different protocols so that one can't use just any...

Comms between controller & display is a usual suspect meaning incompatibility. Though the display may be the same firmware /programming protocols may not be. Does the old display still play ball ok ?

Most of the rack batteries will have simple bullet connectors.

Akiema hubs or the Akm'swhich come via TBK & BMS Battery have sticky labels.

ASHP is a no go in my books . ungainly noisy energy ineffiecient devices which will be poorly conceived and installed across many properties that aren't very efficient even with so called modernising/upgrades. I have come across one such set up with the owner owning a timber chalet/bungalow...

Probem Time will tell and I will keep the forum posted with my investment . I haven't invested to make money or treat it as a get rich scheme which some investors will be thinking, I'm thinking of years to come where I can reduce some of the costs of my power usage as with all things prices...

All maintenance is covered by over production costs so one has no need to worry about fires/dodgy roof installs ect,etc, no roof maintenance of panel system required on the home. Their are no fit/seg payments like a home install , I guess if one wants extra insurance one could opt for the...

No Dave , no additional costs a one off payment. One buys the amount of electric kwh to cover their usage or up to 120% of their predicted usage. All operating /management costs are taken from monies earned from the total Mega watts of energy the farms produce as there will be some over...