Search results

Or expensive nicked bikes.

Kt controllers can run without halls if the display has the the L settings where one can change the parameter via the screen. L3 0 will activate non hall mode. As to your motor connector I would disconnnect / cut the wires at the controller end and then solder them to anew controller so that...

Those three pin Julet type connectors are old hat, one doesn't see many today unless the bike is some 10 years old.

Your replying to a bot or a spammer.

Yes it should do , as this is normal process for a generic charger. Do you know if it was the battery or tsdz that made the noise ?

What does the motor cable connector look like ?

You will best to buy a new controller with a display as a pair, either choose a speed controller like a Brainwave brand which are fairly cheap and basic or opt for a nicer Kuenteng KT controlelr kit cost about £100, it is likely the 5v line may be fried as well meaning you will be better as...

The TSDZ2 has no fuse but the battery will usually have a discharge fuse , if one see's 0v then a fuse has blown. If the display doesn't switch on then it means no power is getting to the display via the battery.

I mainly use 700c wheels with up to 42c tyres and my cargo bike has 650b (27.5") 54c tyres for nice comfort riding , I don't use supension forks as I find they don't add much to comfort but do add weight. I instictively lighten my saddle loading when I see bad sufaces or bumps on the road or...

Do you have a meter to check the battery discharge voltage and the charger voltage ? If not buy one to do so. If the battery is ok and one gets a good reading , the tsdz2 is next. Does the display switch on ?

Oulu a northern Finish City has a great cycling infrastruture in place where snow can be on the ground for 5 or 6 months of the year. A population 200k approx. 77% cycle in the summer snow free months and even in the colder snow months where temps can be -14c up to 42% still cycle for...

Staff don't park their cars inside the work place unlike e- scooters or ebikes.

More then likely if a generic pedal sensor is used , then the fault may be just an insatllation fault of said pedal sensor. We need to see some pics of the sensor . If the sensor arrangement is a generic magnet disc and sensor , then make sure the disc is held firm in place and can't move...

Brightness is std 20 lumens/6hrs 20mins. High 50 lumens /2hrs 45mins. Overdrive 100 lumens/1 hr 40mins. Just standing behind my bike in town lit night light , the std 20 lumen setting is still very bright and not something that can't be seen. To me your obssession with being seen or being...

Looking at it is likely only really suitable for the QR designed panniers of which there are several brands cheap and expensive to choose from, those that utilse a lower adjustable stay put clip.

I have two of these which are super bright even on lowest bright mode. Rechargeable Rear Bike Lights Back Bicycle Light Set LED Front USB Waterproof UK | eBay

Yep that is pretty darn well Red and bright.

Don't know if you want to try or not ? The front bezel easily comes off , I used a finger nail in the joint and easily pulled of the rectangular plastic bezel and the two loose lamp diffusers. One could then trim back the rear of the plastic diffusers by 1mm or so and then insert the read...

Doesn't look very Red with the acetate and doesn't conform legally if it omits white light from the side gaps.

Nice, neat & sturdy looking clean design.