Search results

I haven't a pic yet but on my Ute, I have heath'd a solution that works by securing a main angled support to the rear frame and the CF hitch simply bolts to the bottom of the angled support rearwards of the axle. The Ute being along tail is designed with extra framework to the rear. I will try...

If plod had been their then my interventions wouldn't have needed and he would have been nicked for careless riding of an illegal motorised vehicle on a pavement, these thugs on illegal motor vehicles endanger pedestrians lives riding at road speeds on the pavement.

Your welcome to your view as are we , I simply won't be intimidated by these thoughtless speeding unlicensenced motor vehicle riders whilst I'm walking on the foot path.

This is typical of a bike dumped in a damp cold shed, condensation sets in in on electrical components causing tracking/shorting. The issue could be controller or display affected. If moisture affects the 5v line then any Hall effect component can fail and cause no motion. The only option is...

I would opt for current control every day over speed control whether it is a current controller hub bike or Torque sensor mid drive type bike. The ride power level is determined by the rider and not the bike system as in a speed controller.

For those who have no storage or dry frost free place for an EAPC , I would say find a space indoors and opt for a folding ebike which takes up less space.

For propriatary EAPC bikes with Canbus systems then one for a while has warranty to fall back on if the bike is stored /looked after. For branded non Canbus type bikes from reputable vendors then one has their CS which is often very good. For other brands with poor after service and diy bike...

Simply shutting the bike away in cold damp shed appears to be one particular issue , electronics and cold /damp just don't go well together. Unseen condensation in internal parts are a nightmare and cause all sorts of shorting and tracking issues resulting in abnormal operation. Displays are...

One of the worst Tern snaps I read was from a female rider, alaong with her other half they had been holidaying biking in France. Having ridden down a steepish hill they stop for breather and refreshment , upon stopping her tern simply snapped from underneath her.

Any one who has bought the planetx twin front light , check the base plate mounting screws as all mine were lose . On one light they all vibrate lose on the way to work tonight and I nearly lost one light, I just caught it as it was about to fly off. Tomorrow I will have to find some to...

Yes two options; 1. Use a KT V12L all in one sensor, though one has to ensure the gap between inner crank and BB face is approx. 8mm . So may need along BB unit or one machines /grinds material off the inside of the cranks boss. 2. Use a standard two part PAS as long as one can secure the disc...

The spec's say they are using those aweful Tesla 21700 cells , we know what happens to them they crash and burn and often not they just burn with no crash.

Guys we already have a Brexit /EU thread please go over to the otherside and keep the politicking from these other threads.

You didn't mention anything about getting wet ? But then again should have twigged it from the start, so many folks mention issues like yours but never divulge they rode thru a downpour or left the bike out in the rain.

200 watts human power is in the terrain of semi pro or pro cyclists , your average cyclist will be 50 -100 watts with the fittest managing maybe 150 watts. The average cyclist power is only in short bursts or for a duration of approx. 30 - 60 mins. On a final sprint to the line a tour rider...

She has spammed several threads with the same spiel, one entry was enough.

More UK instabilitly could be on the way as Shell ponder on withdrawing from UK & EU retail sector according to a Reuters. LONDON (Reuters) - Shell has launched a strategic review of its home energy retail businesses in Britain, the Netherlands and Germany in the wake of "tough market...

I don't know your controller type but one expects it may be speed controlled. The KT uses current control as default which allows the user to choose how much power to use, where as the speed controllers usually just give max power until the set speed is reached. The KT delivers power as a % of...

Approx. £100 is right for KT & display + may be a new PAS as well. Afaiaw the other kt lcd's don't offer the L settings , the lcd3, 4 & 5 don't nor do I think the 9,10 or 11.

The use of an old fridge is a good idea for outside use.