Search results

First we need to see the problem.

Freego Eagle is a good bike. Show us the pic of the wiring. I suspect it is the phase wire burnt from the controller but confirmation is needed. It will need some one with soldering skills to simply replace it if that is the only issue.

For the really decent ones like that Bafang one or similar AKM ones, one has to buy from China, usually one has to buy the whole wheel nut set. e-bike brushless dc hub motor anti-torque washers for fixing engines-Greenbikekit.com BBS, ebike batteries, Bafang M620, Bafang M600, Bafang M500...

It feels and rides like normal bike except is has some 500w + of power added, why do people insist an ebike is like a normal push bike when the answer if very far from the truth !!! People need to just be honest instead of pretending they are similar, the reason people buy ebikes is they...

What voltage does the battery say when a meter is attached.

Do you have a meter to carry out wire/voltage testing ? One can't simply buy any controller or display, they have to paired/compatible. I would start with the main controller to display trunk cable, disconnect it at both ends and with a meter on bleep/ continuation mode probe the same wire...

A 5v feed is normal for bikes and all the peripherla items, speed sensor, pas , throttle , motor halls and then display will all have a 5v feed, Any that don't is at fault. The last time I repaired a an error 30 issue was on one of Tony's Wossh bikes about 4 or 5 years ago, the fault was the...

If you had a meter one can do some wire/voltage tests to determine what may be defective. It is pointless buying stuff on the off chnace your hunch may be correct. As Tony has said error 30 can be a fualt anywhere but I would first check the wire loom and try and carry out a cintiuation check...

It is dangerous driving wth no consideration for their actions. Though one can't ID the Transit reg properly, it is worth still reporting to plod.

DGC or DGO looks like the last three letters.

One expects the 866 isnt compatible with the controller, one can't simply mix and match.

Yes you can swap the motor out for any other, depends on the motor connector and how many pins. Repair is possible if one knows the issue, so will mean opening for inspection.

Uart uses simple comms and only the display & controller communicate with each other, RX/TX comms are the normal used. It means that one can't mix n match controllers /displays from other brands. Battery wise one can usually any generic battery if the wiring is simple two wires. CANbus if a...

It's an easy job for a LBS, bread n butter job for them. One would expect they will charge an hours rate to do the job.

I don't think one can use any old generic battery with a Gazelle, it has to be a proprietary one, I believe some kind of hand shaking occurs.

No, the soc matters not as long as the cells are pretty well balanced. If the sense wire jst connecotr is different then make sure the wires are connected in the correct sequence and don't connect the jst connector until you have doube checked the voltages ascend corectly.

Arkose 2 from 2018, 2 x 10 Tiagra group set.

I kept my Arkos as light as possible and opted for the Revos friciton drive with 2 x 208wh batteries.

If pay council tax by DD then they should have automatically credited it your bank account. My council did it quickly soon after the govm't anounced it.

A part from the German forum all the Bosh luvvies never seem to pipe up when they go wrong, yet we hear in the UK that an independant Bosch authorised repairer is snowed under with repair work. When they go wrong I'm pretty sure most stay quiet because the warranty covers them and owners don't...