Search results

A good built motor hub wheel is as good as a non motor wheel, I build all my own wheels front and rear motored & hub geared . I have used them offroad in places where I never or rarely see mtb's and haven't suffered wheel issues. I decided to learn wheel building following a similar incident...

Lycra's are a law unto themselves and look down on any other types of cyclist , we are treated with the same distain as other vehicles.

I don't know if the motor is older then the contoller , the motor pcb board has a poss date on it of 2013 June 20. Though I could be totally wrong. The controller Lishui is 2019. Is the controller sensored ? Is the display a paired item compatible with said controller ?

It's a good job I have a bicycle and trailer as today it helped my car, by me being able to ride said combo to the motor factors to buy a new 70ah 12v battery. I fore see once this car of mine comes to end of life it may well be the last car I have. I will likely then revert the front car...

How many pins does the motor cable connector show 6 or 9 ?

A lot of china wheel kits are poorly tensioned, the issue isn't uncommon.

Great that the re flash worked, now keep water away from the motor. Better dirty & working then clean and not working.

Yes one will have to remove the wheel from the bike, remove the tyre, inner tube and the rim tape covering the spoke holes. Most rim now are double walled so have a void inside where the nipples sit, the lost nipples will be within this void and can be teased out when found. Have ago your...

If you say where approx. you live, some one may be able to suggest someone to look at your wheel to retrue and tension it. You yourself can retrue and tension the wheel on the bike within reason once the loose nipples are found and re ftitted. All you need is a cable tie, a spoke key and if one...

It doesn't need a new kit or wheel, the wheel simply needs rebuilding or someone to replace/find the missing nipples (they aren't lost but somewhere within the rim) the wheel then once trued and tensioned correctly might be ok. Often 13g sppokes are used and they tend not to be very good with...

Car/vehicle drivers need to understand and be aware the reason for riding out from the kerb or even cyclists swerving on roads suddenly. In a car/vehicle one can feel tthe pot holes and how terrible they are, all they have to do is re think the logic and how it would feel to a cyclist.

Action camera's are a cyclist's witness or evidence of a wrong being done to them, it is endemic all over the country where often police ask for camera footage when an incicdent occurs. The lack of road policing means in the most part it is down to drivers condcuting themselves in a lawful...

My guess at best is the speed sensor two way connector if used and water ingress via this point causing possibly a short. The fact walk assist isn't working imv points to motor controller failure. As you are running osf change the Tab 2 assist setting to cadence mode to see if the motor works...

Poorly built/tensioned wheel originally if part of a kit. Tbh you will be best to get the wheel rebuilt or retrued and tensioned correctly as the issue will return. The missing spoke nipples will have made their way in to the rim, if a double walled rim they will be stuck possibly between the...

The reason I mentioned the P variant was because of the higher pd of 120w. The charger is 36v nom x 1.8a so approx.64w or 75w given the max 42v charge raring. The 40w imv will not be sufficient, being that the M variant or what ever it is my logic says the P being an improved or better variant...

The spirit of built-in-obsolescence on their part? Is the nature of most oem bikes older then 10 years of age when it comes to the electrical side.

The reason for not findng an m series one may be that the made a customer spec batch for joycube.

The maker is Kodenshi, I expect one can fit a P variant and all will likely be ok. the mosfet is semiconductor and the current rating and specs will be much the same. H77516 is liklely a factory date code.

Whether or not vonnecting the light connetor to the learn wire has caused a short in the controller one won't know. Have you fitting a brake cut off or do you have one fitted to the bike ?

I had an inkling some time ago but wasn't 100% sure but pretty well am now, nice to see your posts a little more often now and in the memory of your late pal & neighbour using his @ Saneagle avatar. For others you may have to keep guessing who the poster actually is. Anyhow I know you have had...