Search results

With no film clip to hear an electrical issue is even harder to rule out.

It will be ok for 29" wheel if the drop out is 135mm.

Eclipse ?

Tbh until the hub is opened one can't say for sure if nylons gears have gone or if the clutch has broken or even if the issue is electrical.

For 36v x 24ah you dad needs 6 x 12v 12ah batteries, other wise he can only use 3 for 36v 12ah.

My two swizzbees use a mid drive bldc motor, they aren't conventional hubs but ones heinzman made for them.

Yep if one had a licence and got nicked on a push bike then one could also still get a driving ban.

The Leftfield link is an old one, new 8 freights aren't available and haven't been for some years.

Still a bike I would love to have in the stable, three bags of manure would be fine as would general shopping. The main Cof G is low and proportioned perfectly behind the rider, Mike put a lot of thought in to it, shame only a limit number were produced firstly by him and secondly in Taiwan...

Mike is a bloke you would love to speak to and be around, just like Jimmy at ebkebatteries such an interesting bloke to chat to almost infectious as they are so dedicated to there sphere of work . I suspect like Jimmy it is life and though work it is also more like a hobby, one can spend...

A nice little film and some of his workshop with various bits of bikes/frames and a few 8 freights hanging from the joists. An 8 freight is still one I would like to own. Veteran-Cycle Club video archive - Mike Burrows with the Burrows 2D - Bing video

Q100 is 12 x 10 so will need some fettling if the d/o seat isn't deep enough, as indicated most geared hubs are 12 x10 with very few being much smaller.

My Bafang G370 is a 10 mm dia axle, it fitted into my Surly disc trucker forks very nicely with no need to file. One has to select the correct motor and check the specs to see which might fit. G370 I have only seen as a front option.

The behind the seat stance is old school riding and it is one I have used and have done so occasionally still , EPJ used it until he was converted to droppers.

The displays only show ambient air temp and there isn't any controller wiring for temp, though one might be able to use the throttle wiring if one could fit a temp sensor. One can do so on the tsdz2 if the throttle isn't needed as the motor outer is static in the main housing with controller...

The best small bike I have seen and not bettered for weight I believe by anyone, is one of Mike Burrows (A bike genius in design). The fixed frame 2D was pretty good ultra light CF frame with his signature one sides hub/brakes and simple 90 degree bar rotation for storage against a flat wall. He...

The julets are coded for pin out, Red/2 , Yellow 3, Blue /4 etc,etc.

The guy on pedelec .de put over 2000w thru the 250w swxk hub.

No don't do viral stuff like that.

Too thick and grease is worse then oil, the aeroshell has consistency of lard.