Search results

He must be a thicko. The size of the rest of the arm doesn't change, so how can it slide up the taper. Grinding 3mm off is a standard bodge done by several of us on this forum.

But the point is that they were very kind to him up to 2016, then they turned against him. Why was that? I doubt that he changed. If you search for "Trump racist", you won't find a single result before 2016, but suddenly after 2016, it's everywhere. Does a 70 year old suddenly become a racist...

I wasn’t allowed to say anything until tonight, but it's now okay for me to share that I have volunteered for the Covid-19 vaccine trials that a local Hospital are running in partnership with Pfizer. It's important that we all do our part to beat this virus. The vaccine is the one that has been...

A bike with a hub-motor is best for on-road riding and light trails, and a crank-drive for anything steep or where you're going to get bogged down. One thing to consider is who's going to fix it when it goes wrong. The cheaper Chinese bikes can normally be fixed yourself. More and more bikes...

It's OK to grind 3mm off the inside of the pedal arm. The other thing you can do is get a longer BB - about £10 in Halfords.

I used Conti Top Contact tyres for a while. they have really good grip, but the sidewalls broke up after a very short time to the extent that the inner tube was bulging through. They weren't strong enough for the motor's torque. i heard that they strengthened them since then. Marathon Plus are...

That's not enough. You need to be much more specific about your weight, how far you want to go and how fast you want to go. without that, any kit available meets your requirements.

Here's a very interesting anaysis by Vee. Does anyone want to make any comments about the content?

Wrong again. I've seen it with my own eyes, so it does exist.

28" is the one to choose since it's the same size as 27.5" with an MTB tyre.

Yes, there are a few to choose from, but you have a rear motor, so it's not going to work.. You'd be better off buying an electric trike...

Suddenly or do they drop down just before going out. It's important. Can you also tell us about your bike and battery? A photo would help.

The problem is the way it calculates the speed, not the way it reads it. it doesn't know how many pulses you get per revolution and it doesn't know your wheel size. You fix these things in the settings.

Hmmm! You're probably right. I'd go for ADMIN or admin. The password, whatever it is, could easily be given to whoever they wanted. That's no security. The problem is that everything about the machines and the company Dominion seems to be dodgy. There are said to be links to dirty money from...

The difference between me and you is that I'm not partisan. I don't care who wins, which gives me the chance to do two things. Firstly, I can look at the information and weigh it up rationally and logically. Secondly, I can put stuff in front of you and know it's going to make you go nuts...

There are various Youtube videos showing that you don't need to be a service engineer to tamper with the machines. 2 minutes and a ball-pen is all you need to get admin access. Don't forget that some of the major counts were stopped for various spurious reasons and everyone was sent away, then...

After the decision to do the recount in Georgia, you would have thought that they'd do everything possible to make sure it was fair and that there would be no more complaints afterwards. Sadly, that doesn't seem to be the case: https://gagop.org/wp-content/uploads/2020/11/Deficiency_Letter_1_.pdf

Title 16 - Elections and Electors § 16-449 Required test of equipment and programs; notice; procedures manual The test shall be observed by at least two election inspectors, who shall not be of the same political party, and shall be open to representatives of the political parties, candidates...

Do the lights go down just before it cuts off or are they showing full and just suddenly go out, or do they stay on all the time? This will point you to where the problem is.