Search results

Can you give me a quote for an essay on ebike batteries that I need for the Ebike Future Conference and as part of my MSc on Energy Systems of the Future. The title should be "Can Dolphin, Silver Fish, Killer Whale and Shark batteries exist in harmony. Through natural selection, will one rise to...

One thing you can do, and it's just about the only thing, is to check the connectors between the battery and the receiver.

You can't make a rule. You have to try each bike to see how it is. Things have improved a lot over the years, so most modern ebikes are pretty good. The type of sensor can make a difference. Generally, torque sensors are quicker than pedal rotation sensors, but every system has its own...

This MP seems to have nailed where we are with the BBC:

Anybody starting to change their mind yet?

That's weird because when the guys from Patriotic Prayer fact checked the debate, they found that everything that Trump said was 100% true and everything that Biden said was 100% false. To average out the bias, you can average out both sets of fact checkers results, which then shows Trump told a...

When you test the motor resistance, it must be disconnected from the controller and the three bullet connectors must not be allowed to touch each other. If when you conect to the controller, the resistance increases significantly, the controller has one or more blown mosfets. Where?

I can't figure out what's going on. You started by saying that the motor was working, but the speed displayed was wrong. Now you're saying that the PAS doesn't work and you have no throttle. How was it working before then?

Just as well you showed it. The connector is non-standard. I'd keep the cable, cut off the burnt connectors and the connectors on the controller, then solder the wires together and insulate with heatshrink - two layers on the phase wires.

201 rpm Q100 from BMSBattery. The speed is very important, so tell them that in case they try to slip in a 260 rpm one.

No preparation, I just glued the two parts together. I tested this stuff with my teeth. It seems to be extremely hard. The spoke is now easily strong enough in tension. When it's fully cured, I'll see how easy it is to snap.

I just tried it on a spoke. I cut the spoke with bolt-croppers, then glued it back together. It seems to be strong enough. I'll leave it for a couple of days to fully harden, then test it.

I bought some UV glue to repair the bracket on my nephew's LCD, but he didn't keep the part that broke off, so I had to replace the bracket. I've therefore had the UV glue sitting around waiting for something to repair. Last night I broke my glasses. the hinge snapped in two so the arm fell...

Still lamenting the good old days, eh? Unfortunately time only goes in one direction.

Where did that come from? What's that got to do with masks? Are you deranged or something? Do you disagree with any of the data he shows?

Don't you think they would have shown the video evidence if it were true rather than just a single snapshot? Just 2 secs either way would show the truth one way or another. They said that they were recording it. Why would G lie if he knew he had been filmed and the film would expose any lies...

It's alright Mike, he's quite harmless. The poor guy is suffering from both BDS and TDS. The pills they gave him to control it are just not strong enough for both, so we just humour him in this forum. He's a bit like a pet cat that brings you presents, like dead birds and mice. Every day he goes...

No idea. You have to get the tape measure out.

Hollandbikeshop.com is a dealer of Impulse e-bike parts. We often have Impulse e-bike parts on sale or in our outlet. Hollandbikeshop.com is the number 1 bike shop for all your Impulse e-bike parts. We have the widest range of bicycle parts (over 100,000) available from stock. Send them an...

This is quite interesting about masks. It makes the case that masks increase the rate of covid infections. The only proper test results on their effectiveness has not been published because the can't find a journal brave enough to publish the report!