Search results

Fines and penalties for driving illegally or without complying with any documentation is tbh pretty poor, again sentencing for fines etc is not that heavy or preventative. Look at that Price women again in reality got away with it for driving whilst banned and drunk.

You will have to remove a good spoke and measure it or contact Rallye Design/Kudos Bikes who may know.

Problem in the UK is law enforcement is so liberal, it actually perpetuates crime to occur. Out of the G7/8 countries we must be the one with least presence of a police force, a scant few police driving around and only unmarked cars likely to stop anyone and they will in the main be...

Motor resistance seems fine as there is always some minor with backward motion, due to no freewheel action. Does the display turn and stay on?

Things likely won't be much different after the 29th when the new hierarchy rules of the HWC come in to force if agreed on and passed.

Tbh at 74, he should have been wiser and known better. Arm/knee pads and a helmet should be mandatory on these machines with tiny wheels as any slight surface imperfection could have you off in a jiffy. Totally different vehicle reaction to that of a bike hitting surface imperfections and...

It has six pins, outer ones are clearly marked +/- on both parts.

I run steady at night but if merky flashing, during busy times flashing .

The only benefit of scooters is if they are limited to 6mph, as most will be used on pathways and terrorise or intimidate pedestrians to getting out of the way.

The charge has a 10 pin ribbon/jack connection to the battery ?

I wouldn't charge indoors over night whilst sleeping.

If the charger outputs 42v it is working.

The NACHI one may be best offering lateral and axial loading and with double seals. The ease at which they can be replaced I don't think is worth paying much more.

Both are made for Yosepower, yose themselves we have seen have good CS from other buyers who have had to contact them. The cells will likely be a China brand cell from on of the many manufacturers over there, some brands are slowly beginning to get a reasonable or fairly good reviews of some of...

Yes it will need to come out as I doubt the bearing will pass thru it.

Halfrauds can be be pretty poor and service can vary widely it's not only bikes but also cars where not only are their mechanical skills are wanting but the electrical know how of the fitters can be shockingly poor. Recently a case has risen regarding fitting cameras and sensors to a woman's...

I told you how the sealed bearings can be removed in your other thread, the only bit I didn't say was the cassette will need to be held so the inner retaining ring can be loosened. There may be only a single slot so use a screwdriver flat end that fits tightly and gently tap the driver shaft...

Show us a pic of the display, possibly the controller and motor.

Yes. The 576 is max power via throttle or highest PAS level, one will need to have a highish cadence for max power. Unfortunately my experience with BBS01 is pre the 01b models and I have had two controllers blow so I have little faith in it's longevity and reliability. I shall be looking at...

The pawls springs needs a bit of lube light grease, as I said the retaining ring has a notch in it, with flat blade driver it should undo ACW with a gentle tap to get it moving and the two sealed bearings and spacer should pop out.