Search results

15A continuous give little or no head room current wise, ideally 20 continuous. Be careful connecting a range extender once the first is depleted as it will like try and reverse charge the depleted one via the discharge ports. Switching the battery off isn't enough one will physically need to...

Try P1 46 as this is the default setting for the heavy DD 1kw hubs. If the P1 value is wrong I have found out speed and PAS sync on the motor pickup is affected.

Try looking underside of the BB or the down tube near the BB.

Two examples, all depends on the controller connection used. 9 Pin Motor Extension Line 60-160CM For Ebike Motor Cable W/ Hall Connector New | eBay To E-bike 0.65M Black Female To Male 9pin Connector Wire Motor Extension Cable | eBay

Depending on the brand the frame will have 3 -5 years min warranty for defects (and frame braking is not good for a brand) some give 10 years/lifetime warranty. My self never yet ever insured any type of bike.

On the german forum the guys use to find them ( a lot more sold there and in suisse), mostly finds appeared to be spares/repairs as the dual hub and I here the bespoke Heinzeman mid motor brushed motor caused issues.

As fast as my legs can go 33mph, I feel safer though at 18/20mph. Most will be garage/barn finds I expect, I know a few were sold in the UK back in 2006/7. I have two they are enough.

Do you have to hold a pair of buttons to get in to the menus ?

As a brand obsolete now spares will be very hard to find for the electonics.

What battery are you using ? C13 is regen set it to 0 and see if it helps. P1 ?

On aliexpress your bottle connection type is HYDC designation.

Yes it looks a generic type used, though the base connection changes with slight design changes. A new one will come with a new holder so best to swap the whole lot over. The battery is often sold under the XGO brand and is a sonders case I think. Electric Bike Black Water Bottle Battery 36V...

I like these utube tutorials (think it's India and Aussie), a very good starting point and easy to follow . Simply pause and resume to follow when lacing. How to Lace a Wheel - Three cross pattern - YouTube India. Without the bullshit. How to build a 36 spoke wheel. - YouTube Aussie.

Learn to lace and true your own wheels via the many tutorials available, use your bike as the truing stand with cable tie with the end cut to adjust the rim edge to. I find it to be a nice chilling out/calming exercise along with another great skill to learn. Use a free online spoke calc to...

For ultimate control it is simply best to fit a KT with 5 PAS levels of control , then one is spoilt for choice for power levels but always in control of them.

It appears to not use a display so will work, how well it works I wouldn't know. It has PAS so will only have one level of power with a throttle for max power .

any of the KT displays will work from any supplier but not any ole display from another brand. Is your battery capable of 25a continuous should it be asked for ? If not one can limit the current via the display settings.

It tells them that in the #4 diagram/pic , self explanatory.

Problem with used and two years old is you are stuffed having no warranty. £1500 for a TS mtb new is likely not enough. Why not put a 48v 250w Tdzs on a good used mtb.

Exercise = analogue push bike :rolleyes:.