Search results

Post deleted. I forgot your motor pin out connector is only 6 pin and not 8 or 9.

You can't always buy Lishui controller let alone one with the WP connectors for unsensored hubs. One can get sensored but they are no use for you.

The results form the above test will tell us if the PAS is at fault. We know from the walk assist that the controller does work in some capacity. The obvious answer for anyone who can't test or know someone capable who knows what they are doing is to simply replace the complete electronics at a...

If it were me I would check the pas wiring using the meter, however with your system you can't test at the connector. So you have two choices remove the controller lid and access the PAS wiring direct off the PCB or make a nick in the PAS wiring to allow the probes contact. It will need two...

It will chew up any tyre with knobbly bits, so need one with smooth centre .

I have a Revos on my 700c gravel bike and rather like it, had it now for 2 years as new (part of the Kickstarter). The motor controller is in the battery carrier base so you can't just use any battery with out the carrier base. The small Revos battery is only 100wh. Any bike needs approx. 60mm...

No reason why not and if it is still the same, you know it is the controller programming.

Wiring remains the same just orientation of one component part is required. I will take a pic of RHS hollowtech fitting for you later or tomorrow one with small chain ring removed and one with all three in situ.

Sorry all of mine are fitted behind the chain ring, but fitting on the LHS just means one may have to orientate/reverse the sensor or disc for correct signal and direct of travel.

That is the other option. Here a link to the sensor, if you want julet water proof connector they are available. The disc used is thinned down one of 3.5mm. 1pc Assistant Sensor Pedal Electric bicycle Bz-10c Supplies Accessories | eBay Most LBS or fitters are lacking in knowledge of what is...

From UK vendors expect to pay about double the cost of buying direct from China. Buy lcd and controller from the same vendor to be 100% sure of connector compatibility. For UK ebay etc, or forum user Daniel has a online presence at Torquetech.co.uk. Other wise we use Aliexpress sellers...

Rear brake cut off is all that is needed, mainly for on road use it free's one up to signal right across traffic and brake as well. The sensor depends if it is a plunger type sensor or a magnet sensing one.

If sacrificing the small chain ring means you may miss the low gears then think about the rear cassette and fitting one with a bigger/lower gears like a 42t low gear. Alternately one could experiment on keeping the small chain ring by placing extra spacers to move the chain rings out a few mm...

There isn't much space true. The BZ10C sensor is like most it uses an offset bracket to sit behind the BB Black spacer, the magnet disc has the center removed so it can freely clear the ext bearing. One may have to sacrifice the small chain ring and affix the disc with the bolts direct to the...

SST, for the pedal sensor one needs a BZ10C pedal sensor cost about £10 - £18. It is designed for use with Hollowtech or Sram type ext bearing BB's, can be bought with both types of connector commonly used. Normal sensors supplied can be modified if one is good at diy. For brakes one has to be a...

My KM Jlcd has it's own back up battery, have a look on the rear of the screen for a coin button type housing as it may just need a new watch type battery.

Can't help with code but one may just have to keep trying various permutations. Obvious ones like 1234, 0000,1111, 2000, 2021 etc etc. or may be try a year the bike was made. Other wise one will need a lot of spare time to go through every combo possible starting with 0001.

Interesting so the XD01C likely donates that it is a Xiongda V.01 Custom designation ?

For valuation I have used a pro rata formulation that the venerable flecc posted many years ago, it is a good formulation that takes account of battery age which is be the expensive part to replace should it suddenly expire or loose it capacity.

Agree with Monty if one isn't happy with the service or product and a company are dragging their feet or putting up barriers then speak to the card provider for a refund. Annoyingly as it is, it is better to have your refund and start the process again with vendors who are recommended.