Search results

Yes there was fix design change, go out enjoy your bike.

I totally over looked the derailleur but they can be had quite cheaply as well. He can't use freewheel any way on the hub.

Then Woosh loose the in house control and possibly quality control of said bikes, the production runs would also have to be massively greater.

Sadly most women don't like toys like e bikes etc, etc, you should have bought her a nice kitchen appliance :D.

As vfr has said take it back to the shop, the only time a battery is worth playing with is when there is no warranty to sort it out or is second hand which equates much to the same thing.

Your 40a battery wil be shagged by the 50a max current of the controller. To use that controller you will need a battery capable of 60a current draw or more using top 20a cells from LG or Sony. I should think your battery will have 10a cells but we would need to know the exact cell used as...

Are you sure ? I didn't know we had invited you :p. Now the pleasantries have been administered some pics of your bike would be nice. I'm sure if you have any Q's they can be answered.

Personally I would put a 8/9 spd cassette on it and change the shifter, and opt for a better low gear. A 34/36t low gear then becomes an option.

For the shop a rack and panniers straight away makes it an uninspiring bike for low life/scum, as does not cleaning any grime off it. Use two locks to each through the wheel and frame, the look of an unloved bike may attract less attention then others.

They will work though the rubber will be stretched and so will be thinner in areas, punctures may occur from within rather then from tyre penetration. Thinner material may be under more stress and split/blow out.

The problem with displays if removable is the contacts then become an issue and as we see with some of the mid motor brands cause connection issues. The more blingy a bike looks the more attention it receives. Convert a nice bike in good mech condition but don't pay much attention to detail and...

KT is Keunteng an electronics brand a very good China producer. I leave my main bike at the superstore and in town when shopping, like anything if one knows the local area they should be aware where it is safe for 20/30 mins to pop in to do some shopping. With bikes it's often a routine thing ...

A bit of a thread resurrection so to add more. A year on I'm still out and about, and after the accident was back on the bike the next day. The driver was another idiot or as I like to call them a Moton (a play on the word Moron) who was too much in a hurry to get from A2B without exercising due...

No pleasing some folk. I have lcd1, 2 , 3 & 4 none have been tampered with, if you don't have an lcd you don't get the nice power levels for control. With thumb throttle the power is either on or off and twist throttle is a kin to being a moped and not a pedelecs.

At least three China sellers of Wuxing 108x -L julet on ebay. https://www.ebay.co.uk/itm/E-Bike-Thumb-Throttle-108X-Handbar-Waterproof-For-Electric-Bike-Replacement-New/233656984957?hash=item36670aa57d:g:gkQAAOSwK-NfFg9U...

Higo and Julet do mate perfectly but they are wired different, Higo I think is a Belgian company. 8Fun / Bafang are one and the same they use Higo. I have a LH 108X on my KT equipped bike. They are on Ali Exp...

A 250/350w is the same hub with a different marking , try and sell anything marked 250w in the US and a sellers options are very limited.

Julets use a std wire layout/orientation. For the Yellow 3 pin male connector looking at pins head on Gnd /Black is opposite the little alignment indicator , White/ Sig is lhs and Red/5v is rhs. Female looking at the pins head on is Gnd/Black opposite the alignment indicator, White/Sig is rhs...

What ever.

Just answered your own question. It will be easier all around to 3D your own.