Search results

  1. Nealh

    Geared/high torque 48v motor

    One of these Yalu BLDC motors might work they typically are about 3000rpm, a similar typre that vfr linked to. https://www.aliexpress.com/premium/yalu.html?d=y&origin=y&catId=0&initiative_id=SB_20200704013345&SearchText=yalu
  2. Nealh

    Pedal sensor problem

    Don't pedal backwards.
  3. Nealh

    TSDZ2 Crank fell off - what spec for replacement nut?

    Before deciding if the charger is no good, you have to check the chargers out put connector with a meter. If it is a 36v charger it should read about 42v.
  4. Nealh

    Anyone know how to find a replacement battery for a Claud Butler Glide 2, or would it need all new electrics?

    No one bike is the best bike as they all will do the job in one way or another, let her try yours. May be you have the best bike ? The best bike for her in one that fit's and feels nice to ride, so trying a few may help out. There are many factors to consider: Rider weight, terrain, distance...
  5. Nealh

    Genuine company from Germany ?

    An ebke can go for 8 hours if you use it in the lowest power setting, it will go days if you use no power at all. On the other hand use it on the highest power setting and you might be lucky to get 2 hours so the LBS was right in one way. Todays ride I was out for seven hours, I returned home...
  6. Nealh

    ebike

    The small/thin wires can carry high voltage up to 300v , what they can't do is carry high current. The current will be about 1a or less.
  7. Nealh

    Cyclotricity, help fault finding

    Do they actually switch between 5v & 1v ?
  8. Nealh

    general charging + solar panel on a converted E bike (how?)

    You will need to do something so XT90 is probably the easiest solution. The controller wire rating will enough with headway for the controller max rating, if you wish to you can if you want de-solder them and re-solder thicker awg wiring to match the battery but really not necessary as the wire...
  9. Nealh

    Please help to choose E-bike for 2 child trailer and unfit parents.

    Tbh it will only be good advise if any responders had young tots that they carry around, a lot on here will not be in the age bracket or those who are and have tots don't go down the route of perching tots on their bikes for safety reasons. The way to go carrying kids is the Danny MaCaskill...
  10. Nealh

    Controller Case/bag Supplies in the UK

    The OP was misleading and should have been worded better. Should have simply said looking for a bag to fit S12S in.
  11. Nealh

    CYC X1 Pro gen 2

    Probably because it is to high powered and costly for most to use also until you posted, never heard of it before. It's a motor more for the likes of the ES guys.
  12. Nealh

    introducing the Woosh Grand Camino

    You won't go wrong much in choosing Woosh and the bike looks a good un from their stable.
  13. Nealh

    Volt meter

    The one I linked will be fine for the job and will give a very good indication of battery state when in use.
  14. Nealh

    Controller Case/bag Supplies in the UK

    Looking at their rip off prices I would sooner get one from AliExpress or ebay China seller for at least 60% of the price, why buy the inflated £114 when they are about £45.
  15. Nealh

    Viking MT Tobin controller problem

    Thumb throttle is separate programming so independent. Tell us the three wire colours from the controller and PAS or show us a pic of the connection, likely the wire sequence is wrong. 5v to 5v, Gnd to Gnd & Sig to Sig.
  16. Nealh

    newbie

    Look on the tyre side max pressure should be stated, 40 -50 psi will be in the ball park.
  17. Nealh

    Volt meter

    A simple two wired one off ebay will do, one that shows volts,% & a meter or get a cheaper one that just does voltage. Extend the wiring to fit it where you like, If no where to fit it make up a simple ali mount to fit under the steering tube top clamp fixing and mount it in a small project...
  18. Nealh

    Voyager Pro Rider

    Plenty on ebay look search for Silverfish and the voltage you need 24 or 36v. Check battery polarity before connecting when you get one.