Search results

The Bosch don't allow for any voltage reading as it needs to connect to the controller and display at the same time, the CANbus comms are a closed system best not to try again as you could bugger it up big time and brick the system.

That Hulong motor cable is a specific oem type only by the looks of it and certainly not compatible with any of the nine pin Julet types around. You can try contacting them to see if you can get motor to controller cable...

Value of a 10 y/o hybrid tbh not very much, in todays age cable disc brakes are a bit naff but ok until you try the no nonsense hdb's/ A front conversion can be ok if it is 250w rated then again it really depends on the forks and d/o's. Mid drive are often much easier then rear hub kits but you...

They have been given the green light as a trial process with a view to incorporating them in to law and every day use. They are to be banned from pavements and for road use only. Max speed is 12.5mph. Max permitted motor is 350w. No training or helmets are required. Look like this menace will...

I'm back in, I asked for a pic and you kept saying it's three pins typical of a newbie know-all. The reason we ask for pics is to see for ourselves the complete picture, although that is just a stock pic from Bafang it clearly has nine pins showing and not three. So it is for a hall sensored...

The diy water bottle holder battery is as stealthy as you can get on a kit build, no one is the wiser.

I'm already out and this isn't even Dragon's Den.

He's not off to a good start is he.....

A good buy David esp using your nounce to get the extra 10%, lets hope you have trouble free riding as Halfords are the sharpest knife in the box when it comes to warranty quick repairs.

Elaine going by those new readings your battery is dead/a goner. These are extrapolated to individual cell readings from the above something isn't correct esp B8 10v isn't possible. Recheck all again with a new PP3 battery in the meter please. B1 2.97v B2 4.0v B3 3.94v B4 3.04v B5 3.92v B6...

Ok, we might be getting somewhere now as we were basing issues around all previous voltage readings. There are some big differences from one week to another either you messed up somewhere or the meter is giving you incorrect readings, replace the meter PP3 battery with a new one and take the...

How about showing us a pic of the motor and connector so we know 100% what you are gibbering about. Is a pas necessary ? Yes it is how else do you plan to ride it legally!!!!

Due mainly to a new pleb user with an axe to grind and obviously an anger management problem.

Tell us the bike as some systems won't give a voltage reading. Physically you can't actually measure the range left, you can get a voltage reading on which you can make a rough estimate of how far you might go. For a voltage reading set the scale to DC, this means turn the dial to the LHS where...

Sound advice from DBye , check the charger voltage and the battery voltage a sit is. Some batteries and chargers have an internal charge fuse, sometimes they blow.

You will find that all bikes require you to generally pedal to move even ones without assist, once moving you will be able to freewheel until your desired speed becomes to low.

Only Flecc or Admin can add you to the map, now you have posted Flecc will at some time add you.

It's surprising what people will nick, probably stripped down now for all useful parts or a nicked wheel has been fitted to use.

The lidl middle isle bike products don't start until Sunday 24th May, looks like saddles aren't going to be available.

Insatllation won't be the cause unless the Op has carried out maintenance/removal of the gearing/drive, likely to be QC in manufacturing/production process (maybe it was a Friday special).