Search results

With an adapter spider for mdi mount like BBS you can go 2 X, but only as low as 34t.

I have already said P2/1 or P2/6.

Without rim tape the tube will slide on the shiny inner surface as it slides around, the only option is for the valve base to rip/tear as it pulls against the valve hole. For rim tape you can use anything . electrical tape, tubeless tape as well as a proper rim tape.

Agree Pete, only issue's I have encountered are thermal cut out with the 6 mosfet models.

The avarice and greed though is not the individual who owns a few cheap bikes or other belongings but the hypocrisy of the rich with their private million dollar jets or the charter of one for tens of thousands of £££'s to go away on holiday or to flit willy nilly around the world at will, the...

It may be the case that as a customer custom job with no display that the controller may still have the pcb solder points and a 5 pin lead needs soldering to the board, I can't see there being an unused wire connector being tucked in there but certainly it is worth un screwing the base top to...

Pedal free power is available with a moped, most ebikes that use a throttle requiring pedal first activity are in the main restricted to 25km/h by controller programming on 36 or 48v bikes. There is no restriction on how fast you can peddle above the cut off. Tbh most of us have been there...

O,k it is a standard nine pin Julet connector nearly all hub motor manufacturers use them to a standard wire pin out order, the Bafang hub is a sensored hub with internal speed sensing. For the electronics a signwave controller will be required which we can help you with in deciding when you are...

An ebike that is hassle free that would be a novelty, generally they all have niggles of some kind.

If that is the case your battery isn't up to it. I can notice the difference in all PAS levels. Remind us of the battery you are using and it's approx age......

I have a lot on my plate at the mo so not thinking 100% straight. Pete is correct the speed wires need disconnecting to gain the extra speed 30% speed. Also as Andy mentions if under throttle the bike cuts out after a few seconds then simply the battery CANNOT handle the current asked of it...

Should be no problem, the motor connector is the standard julet pin type pull it apart and tell us how many pin outs. Any other details/labels on the Bafang hub ? The controller is tiny and is in the base of the battery receiver, it is 15a so not to bad and is a Lishui model though if it...

UPP are China based they just use German warehouse to avoid tax duties, you would likely have to deal with China office.

Does PAS5 work ok without cut out with current set to max value ?

A lot of the China German warehouse sellers do in the small print say that any returns or defects are to be sent to mainland China. I think Yose might be one exception.

I have a specialised pathfinder pro 2 bliss to try out on the CX/gravel bike and for my new Road rat CX build I have some SKY BLUE rims ready to build the Alfine 8 & Bafang G370 (now on route from China)in to , for these rims I have a pair of 700/43c Panaracer gravelking SK's coming in BLUE. All...

On inclines esp steeper ones as mentioned you won't get max speed unless you are a TDF rider and your cadence is over 90/100 rpm but what you will get is max power at a lower speed and torque.

Your 22650's look like an unbranded China cell, I don't think any of the big six bother making them for ev use.

18650 are the ones of choice, 21700 is a bit too new and not much real world info on how they perform, except possibly the new Sam 50E looks very promising if not flogged to death. Some are better then other but it all depends on the current required and capacity.

You have to show us some clear pics of the bike, the controller box and it's wiring layout. Some wiring colours might not make sense but we need to see clear pics to see if we are able to help.