Search results

My 29E didn't like the GSM and it suffered with range after, admittedly I use the GSM unrestricted and @ 36v 29 mph /46km/h was doable. Kirstin also had issues with his 29E after using the GSM.

Neater then cable ties.

I think it's Marwood who has fitted one to his twin hub Big Bear, I had never seen one before until I saw a pic of his bike and trailer.

It probably makes one of his neighbour's weep :oops:.

Battery recell Insat Intl/BGA Reworking. The two VE+/- are just separate feeds for charge and discharge if left on the bike all the time, the battery's receiver would has a charge point as well as the battery.

Replacing/changing all spokes on a wheel is quite easy but truing is a bit of an art but again easy and satisfying when learnt. For trued wheel take it to an LBS who might do it for you or try your self with wheel on bike. Using a bike stand spend 1hr or so to fine tune the rim, trueing with a...

I sometimes pull tape off but it certainly only takes me a few mins to rip off any to discard. Often I just chuck it out side and the damp/dew over a few nights does the job, then it gets recycled.

C1 setting for V12 needs a different parameter to work use 5, 6 or 7.

He looks like he's still waiting for WW2 to end.

Tabbed/AR washer generally sit inside with tab facing out, tab sits in to axle drop out, though I have one bike where the AR sits on the outside as it works best with spacing available. Nut usually up against washer or torque arm.

Yes you are right displays needs to be able to read battery voltage.

Two option I can think of; Speak to Jimmy at Insat Intl/BGA reworking as he may be able to help you or speak to the good people at Woosh Bikes, Andy I believe is very skilful with these fiddly leads and is able to make up custom leads.

LOL :D.

You will remember the good times and memories and forget about the bad just as you did 22 years ago.

Yose website seems to be full of kits from Berlin warehouse,, 16 hub kits & 3 BBS. 48v one should be good at 17a. https://www.yosepower.com/en/category/Motor-Kits-37/1.html

16ah mat have better cells then 10ah depends on the specs. What does Q2 mean , battery left at full voltage and not used will loose capacity sooner. Mininum ah depends on the cell quality if using HG2 or VTC5A you could get away with 5 - 6ah for a 10 mile or more if you can manage on low wh...

So it is now working ? Might be a poor contact somewhere check for any pins that may have backed out or poor connector that needs a little crimping better. If the pas is slipping V12L ? Use a wrap or two of tape on the BB axle for tighter grip. Ultimately yo should have no problem as my Yose...

Probably a bit of both, I believe that sometimes they both go hand in hand and you get a gut feeling about it that tells you to walk away and try again. Sadly for you your dear ol dad had become ill and now passed away, so at this time you will feel disheartened and saddened by recent on going...

The kit has a cheap basic controller without the option for pas Dav, also there not being a led or lcd you will have no access to any assist levels. It will be pointless to pay for that kit then to spend another £60 - £90 on another controller and lcd. Also the DD kits are heavy at about 5.5...

We need to see a pic of the controller and wiring and also a link to the kit.