Search results

Greenbikekit when they are in stock. Panda only with a complete kit. BmsB do have a second site can't recall it at the mo.

That's a dedicated commute every day of the week in all weather. Firstly you need some where under cover and secure for your bike even if you lock it up. Invest in decent protective clothing. As with pedal bikes E- bikes are for everyone, the ones who will remark or comment are those not...

I use a D lock and an Oxford 1m lock one to go through each wheel, 99% of the time when out and I only leave a bike locked up in one place for max 20/30 mins.

These two China suppliers sell and despatch from their German warehouses, so no imports fees or vat to pay. Both use KT controllers and the lcd3 etc, check their stores for other hub kits...

I would be inclined to take it back and explain the issues. It could be an iffy wire connection the battery/switch.

You don't say what terrain usage but what ever a gearing that allow you to spin easiest will be best.

Chain length looks ok, to be sure remove chain from derailleur and put it (the chain) on the two largest gears the ends should meet then allow +1 more link. For you crank remove and check both threads are they damaged or dirty, if undamaged try cleaning both threads and finally use some...

Have you tried backing off the backs top screws and tried resetting the adjustments. Start in high gear (9) and adjust (H screw) until it doesn't' jump to 8 then flick straight to low gear (1) and adjust (L screw) so that id doesn't jump to 2 or the spokes. then flick up and down thru the gears...

It doesn't have to be exactly the same you can upgrade to Deore or XT range as long as it is for 9 gears. Is the grinding due to derailleur / chain rub and just needs adjustment or may be worn small jockey wheels on the derailleur. Remove the chain and see if they rotate freely.

Very much like Campagnolo's. https://www.ebay.co.uk/itm/Campagnolo-Freehub-Pawl-and-Spring-Kit-12-17mm-FH-BO014/232562891836?ssPageName=STRK:MEBIDX:IT&_trksid=p2055119.m1438.l2649 Or more likely a DT Swiss pawl...

Beekeeping forums I suppose I would come under other :p.

Remove a good spoke and simply measure the length from end to middle of the elbows bend.

The above pawl is the same as the ones in the Swizzbee rear hub. So might be a generic type. I wondered if the 3/5 speed Sturmey's were a match but not quite.

Nkon.nl now sell the vruzend kits overall the price inc p&p is a bit cheaper then direct from India.

2 cross in a 26" rim with a 180mm bpm isn't ideal for nipple angle. A 2 cross lace, the angle at the nipple is a bit stressed. A 1 cross lace will straighten the nipple entry though needs complete rebuild and new shorter spokes.

:eek:Don't speak to soon, your now doomed keep the carton just in case.

33G celled battery here if anyone is interested but performance wise not as good as the 29E and only marginally slightly better capacity as mentioned by Cellman...

As in the title, if I wish/decide to use 48v with my dual voltage KT controllers. What would you go for if using 18650/20700 cells 12 or 13s ? Using lipo 12s is the easy option as I have 6s available but in due course I will need to replace one if not two of my 36v Samsung 22/26F crappier celled...

They indeed do but both have different controllers and software, BBS02 controller doesn't fit BBS01 as I said you will get 07 error and won't work, try it yourself hook up 12s lipo and you go nowhere.

No chain rings but PSWPower sell the spiders for standard chain rings to fit the Tongsheng. http://www.pswpower.com/peng/iview.asp?KeyID=dtpic-2017-84-GGTT.3RWAR