Search results

Just a pre-emptive thread for current & future happenings with any MXUS xf07 (front) or other MXUS not necessarily purchased from PSWpower. I ordered mine yesterday, so they will have about 4 or 5 left in the German Warehouse, I will update on additional fees if any are added (VAT, Courier...

Just a quick post, I am getting new steel(chromoly) rigid forks fitted, [oxford cheap(ish) make £40 but look really nice in person] to save the LBS some hassle I removed my motor and brakes etc. Upon inspection of my long motor cable I came across two areas of wear one inside the axle near to...

Here's a rabbit hole. I jinxed the 10000 mile YOSE motor. The controller[36/48v KT sine 14a] has done about 5000+ miles in 48v mode Motor 250w 36v as mentioned 10000+ PAS & 1 to 4 cable changed for new once a year[ish] KT LCD3 over 10000 Throttle half twist a year old So I got caught in a...

I have just read that the UK is now requiring overseas OMP's to register for VAT and to add VAT at the point of sale for UK B2C and B2B sales. As we all know some parts can not be sourced from ebay and such or if they can, it's often dispatched from China or at over inflated prices. From what I...

Just thought I would start a new thread were the Yosepower kits are concerned and the generalised field of customising any ebike ekit is concerned... My current project has hit a wall - Customising a Yose 350w rear kit (36v 26" 15amp) for the sake of future proofing and to allow a 48v battery...

AS questioned... Would this work on KT controller...

This kit has got a few scraps and scratches however it has only done 300 miles, all the fixings are complete and some parts have never been used and one part broke I did try and replace it and I did in a fashion, the PAS with a cheap PAS the only draw back is it activates when you pedal...

Thanks in advance... (video coming soon)I managed to trail and error a 3 wire throttle (black, red & green) to "julet" waterproof connector (black, red & white) and it works fine however it was really easy to plug n try, as the throttle is easy access... Now its time for the new PAS, again 3...

It goes to show what you can do if you put your mind to it... My hub motor died sept 2017 thinking it was damaged for good I purchased another, after watching a few youtube videos and a little light reading I decided to take it apart and attempt to fix it! I have limited electrical knowledge...

Hi all After a great deal of youtubing I have decided to have a go at fixing my hub motor by replacing the hall sensors and some of the internal wires. From a visual inspection of the motor itself some of the wires are burnt and exposed and while I am in there I will have a go at swapping out...

Hi all I have a 14 month old Dillenger 250/350w front wheel street kit that did 1800 miles and the hub motor has now failed on me, Dillenger have been kind enough to help me out however it is out of warranty so I am going to buy another motor very soon. I have replaced the controller with one...