Bbshd pas watt output?

[R66bby]

Quick question. IV tried searching and might have found a answer but would like clarification.

on a bbshd which is 1000w.
say the PAS is 1-5 and pas 1 is set to 20%, pas 2 40%etc

Pas 5 would be 1000w
Would pas 1 be the equivalent to a 200w motor?

I haven’t got my bbshd yet to try but I’m after a tsdz2 for my road bike and trying to work out what W motor I would like.

 

[Nealh]

No,
Each PAS level is a % of the current the bike's controller is set to deliver .
The BBSHD is about 30a where your average 250w motor is no more then 15 -18a.
BBSHD supplying approx. 50/60% will out put more then a 250w motor in max PAS level.

 

[R66bby]

No,
Each PAS level is a % of the current the bike's controller is set to deliver .
The BBSHD is about 30a where your average 250w motor is no more then 15 -18a,

Is there anyway to try and compare then?
so when I get my bbshd and say set it too Pas 2 which would be the equivalent to eco mode on a 350w tadz2

 

[peter.c]

No its more like turbo on the tsdz2 48v which max is 15 amps the torque level is way higher on the hd