The pic is very poor and the pixelling gets a a lot worse when enlarged, I can see it's 3 pin but can't see other detail which isn't clear at all. Some have a keyway notch/lug so one can't connected incorrectly.
Also what voltage ?
The pic is very poor and the pixelling gets a a lot worse when enlarged, I can see it's 3 pin but can't see other detail which isn't clear at all. Some have a keyway notch/lug so one can't connected incorrectly.
Also what voltage ?
I'm not 100% sure but it looks very similar to a an XLR connection.
It appears to look like an XLR connection but unusually has the male pin out on the battery, they mostly have the female socket on the battery. Whether you can find a charger with a female XLR I don't know.
If it is XLR then one can but the female connector for a £3 - £4 to see if it fits and if so buy a charger with male XLR and swap the connector over to the female one.
The XLR has a small key way so one can't connect incorrectly and to prevent twisting and bending of the pins.
Hi everyone hope your all ok can anyone tell me which way the wires will on this please its for the pedal assist as had to put a new one on thanks for any advice
Hi everyone hope your all ok can anyone tell me which way the wires will on this please its for the pedal assist as had to put a new one on thanks for any advice
On both sides the Blue is signal, Red is 5v and Black & Yellow are the Gnd.
It is common to see Yellow used for Gnd if Black isn't present, if Black and Yellow appear on the same side then Yellow is the signal.
On both sides the Blue is signal, Red is 5v and Black & Yellow are the Gnd.
It is common to see Yellow used for Gnd if Black isn't present, if Black and Yellow appear on the same side then Yellow is the signal.
Hi neath I’ve fitted the pas with the colours fitted like you said but I have a slight problem the motor also turns when you peddle backwards any ideas as to why this is happening tried to send you videos but not letting me