Help! Connecting headlight to BBS02

[mt247]

Which one goes to which? Black/white and black wire comes from bbs02 and red and black wires comes from lamp.

 

[Deleted member 33385]

Which one goes to which? Black/white and black wire comes from bbs02 and red and black wires comes from lamp.

I went black to black on my BBS01b, ignored the other colours - it's easy to tell if you've got it wrong, because the LED in the headlight doesn't last long. Mine's working fine.

 

[mt247]

I went black to black on my BBS01b, ignored the other colours - it's easy to tell if you've got it wrong, because the LED in the headlight doesn't last long. Mine's working fine.

Thanks, I'll try this.

 

[Deleted member 33385]

You know what this connector type is and how to pull them apart once you connected them?

They're crimp connectors - you can use a crimping tool, it's best to solder them, but I just tightened using a very large set of pliers... will get around to soldering.

You can undo them by prying using a small flat screwdriver.

 

[Nealh]

Black/White indicates that it is the v+ side.