Long story short. I have got a hailong battery cradle controller from eggbikes.co.uk. to replace the old similar controller that was giving me an error 30 message. the bike on the stand worked fine, PAS reacted and started the motor, throttle worked also
. As soon as i got on the bike the PAS refused to work unless i restarted the LCD. the throttle worked for a while until i did 7/8km. then the error 30 came back. The screen now does not show battery voltage correctly, does not show speed and after a while it gives an error 30. also the throttle does not react anymore and the PAS is not giving signal to the controller *no red light.
my motor is a rear wheel 500w bafang. Battery 36V panasonic cells, controller in URL screen is Key Disp 21C....
any help would be hugely appreciated. at this point i have to understand if the controller is damaged or the screen or what is going on....
eggbikes.com
. As soon as i got on the bike the PAS refused to work unless i restarted the LCD. the throttle worked for a while until i did 7/8km. then the error 30 came back. The screen now does not show battery voltage correctly, does not show speed and after a while it gives an error 30. also the throttle does not react anymore and the PAS is not giving signal to the controller *no red light.
my motor is a rear wheel 500w bafang. Battery 36V panasonic cells, controller in URL screen is Key Disp 21C....
any help would be hugely appreciated. at this point i have to understand if the controller is damaged or the screen or what is going on....
brushless in battery hidden controller
